User manual

36
Special Features
Close Call Delay
You can program a 10-second delay or frequency
while using Close Call. With this feature, the
scanner continues to monitor the frequency for an
additional 10 seconds after the transmission stops
before resuming scanning or searching.
To program the Close Call Delay on, press 5/Dly
during Close Call mode.
To cancel Close Call Delay, press 5/Dly during
Close Call mode again.
Chain Search
This feature lets you search through preset
frequency ranges. You can also change each range
to a range you set. There are three modes within
this feature: chain search mode, chain search hold
mode, and program band select mode.
UB340ZH Paper OM reduced size.fm Page 36 Monday, September 26, 2005 2:56 PM