Use and Care Manual

6
GETTING TO KNOW YOUR CAMERA
Micro SD Card Slot
Reset Button
Daylight Sensor
Lens
Status LED
Built-in Mic
Speaker
Flat Mount
Working Mode
App Cam Solo has two working modes:
Standby Status: The camera is in the power-saving mode; there is no live
view or motion recording.
Working Status : The camera is running at full capacity. It enters the working
status when someone is accessing the camera via Uniden Solo App or the
PIR motion sensor detects a movement.
LED Status
Color Mea
Colour Connection Status
Red WiFi Connection failed Blinking: Standby
On: Working
Blue WiFi Connection is successful Blinking: Standby
On: Working
Note: LED will flash every 20 seconds when the camera is in Standby status.
Appearance
Built-in PIR Motion Sensor