Owner`s manual

Using Tone-Out
112
• — Sets the time the scanner
remains in monitor mode after the scanner
receives a page and the carrier drops.
• 1-5 seconds: the scanner resumes standby
mode after the carrier drops and the selected
time expires.
• Infinite: you must press HOLD after a page to
resume standby mode.
• Off: the scanner resumes standby as soon as
the carrier drops after a page.
• — Sets the alert the scanner uses
when it receives an alert .
• — scroll to select the
alert tone pattern, The scanner sounds each
alert as you scroll to its numbered value. If you
select , the scanner does not sound an
alert.
• After you select an alert pattern, the scanner
prompts for the alert level for a received alert.
Level options 1 to 15 sets a fixed audio level
independent of the main volume setting. AUTO
uses the main volume setting for the alerts.
Set Delay Time
Set Alert
Alert1-9,Off
Off