Owner`s manual

Planning
131
System Frequencies
Fleet Map (Type I or Type I/Type II
Hybrid Only)
Band Plan (VHF/UHF and P25 only)
Group Name and Quick Key
Talk Group ID-Alpha Tag-Alert
Enter the frequencies used by the system. Motorola
systems can use up to 28 frequencies. Place an
asterisk or other mark next to frequencies identified as
data channels.
Fill in the fleet map used by this agency.
A band plan is required so the scanner can correctly
determine the voice channel frequency. Fill in the band plan
used by this agency, consisting of:
• Base frequency
• Step frequency
• Channel offset
You can enter up to three band plans.
Usually, the scanner stores the band plan automatically
when it receives the band plan from a repeater. Therefore,
the user doesn't have to set the band plan in most systems.
The plan must be set manually only when the repeater
doesn’t send the band plan. If you set the band plan
manually, it is necessary to input the following item.
• Base frequency
• Step frequency
Each “Motorola System Worksheet 2” documents the
settings for one channel group within a system. If you
have fewer channels in the group than fits on the
page, you can skip a line and enter an additional
group of channels (enter the group information in the
line you skipped). If you have more channels for the
group than will fit on the page, use additional pages.
Fill in the key you want to press with to quickly
activate/deactivate the channel group. You can assign
the same quick key to multiple groups within a system.
For Motorola VHF/UHF system
For Motorola P25 system
Fill in the details for each channel you want to store in
this channel group.