User manual

ARC246 Software User Manual 1.10- 47
Filters:
Because trunk id’s are normally just ‘numbers’, WebCatcher can not tell the
difference between an id and other data. Therefore you must use filters.
Experiment with these filters. As long as data is not copied back onto the
clipboard, you can always go back to the original data by using the ‘Import
from Clipboard’ option.
Follow these 3 basic steps:
1: Import From Clipboard > 2: Filter data > 3: Copy Selection
To Clipboard
Once data is copied onto the clipboard, simply paste in ARC246.
Filters are applied to the grid when you click the apply button.
+ Line must contain a number:
This option checks if at least one number ( 0-9) is present in a line or row. If
no numbers are present, that line is removed from the grid
+ Remove lines containing this string:
Removes lines that match the string that is entered. The string is case
sensitive. For example if you want to remove lines that only show frequencies,
enter the decimal character ( . ) here and click Apply.
+ Remove lines NOT containing this string:
Removes lines that do not match the entered string. The string is case
sensitive. For example if you want to import Motorola type 1 id’s enter the -
character since these id’s (e.g. 122-34) always contain this character.