Owner's Manual
24
x Program Search Range. This mode allows you to set the upper and lower
limits of your search range.
x Limit Search. This mode will search for active frequencies within the upper
and lower limits designated. It will stop when it locates a frequency.
x Limit Search Hold. During Limit Search mode, press to stop
searching with the serach range regardless of whether you have found
transmission. Press or to resume searching.
Programming the Limit Search Range Upper/Lower Limits
1. Press then . The scanner holds on the current search
frequency.
2. Enter one of the range limits, then press .
3. Press
▲
or
▼
then enter the other range limit, and press .
Searching the Selected Range
After entering the limits (or use the default limits), press . The
scanner starts searching from the lower range up to the higher range.
To change the direction of the search, press
▲
or
▼
.
Holding on a Frequency within the Limit Search Range
1. In Limit Search mode, press The scanner holds on the
current frequency regardless of its transmission state.
2. Press
▲
or
▼
to change the direction of the search if desired.
3. Press againorto resume searching.
1. When the scanner stops on the frequency you want to save, press
to hold on that frequency.
2. Press . The scanner displays the lowest-numbered empty channel
(or channel number 1 if all channels are used).
3. Use
▲
▼
to select the channel to store the frequency, then press
to store the frequency into that channel.
If the scanner stops on a frequency that you don’t want to hear, you can lock it
out. When locked out, the scanner won’t stop on the frequency in either Limit
Search or Service Search.
Press when the scanner stops on the frequency to lock it out. L/O
displays.
To unlock the frequency:
1. press during a Search.
2. Manually step to the frequency using the
▲
▼
keys.
3. When you have selected the locked out frequency, press to unlock it.
1. Press during a Search.