User Manual
28
29.7-49.99 10 NFM VHF Low 380-399.9875 12.5 NFM
50-53.98 20 NFM 6 Meter Ham 400-405.9875 12.5 NFM
54-71.95 50 WFM VHF TV 406-419.9875 12.5 NFM
72-75.995 5 FM Astronomy 420-449.9875 12.5 NFM
76-87.95 50 WFM VHF TV 450-469.9875 12.5 NFM
88-107.9 100 FMB FM Broadcast 470-512 12.5 NFM
108-136.9916 8.33 AM Commercial Air 758-787.99375 6.25 NFM
137-143.9875 12.5 NFM Military Land
Mobile
788-805.99375 6.25 NFM
144-147.995 5 NFM 2 Meter Ham 806-823.9875 12.5 NFM
148-150.7875 12.5 NFM Military Land
Mobile
849.0125-868.9875 12.5 NFM
150.8-161.995 5 NFM VHF High 894.0125-960 12.5 NFM
162-173.9875 12.5 NFM Federal 1240-1300 25 NFM
When you select “Auto” for a channel or mode’s modulation or step, the above values are used
unless you’ve edited the Band Defaults. Although TV bands are listed, the scanner cannot decode
digital TV audio.
SETTINGS MENUS
To Edit Settings press MENU. Scroll to ‘Settings’ and press E/ .
Scroll to the settings and options below (in Blue) and press E/ .
Set Backlight Set GPS Format
Adjust Contrast P25 Threshold
See Scanner Info Firmware Version and Serial Number
Adjust Key Beep Set Upside-Down
Set C-CH Output Set GPS Baud Rate
P25 LP Filter Disp. Unit ID
% Memory Used Cloning
Scanner Reset
Set Backlight
You can also change the intensity by pressing VOL to toggle your desired level to Off, High,
Middle, or Low. Set the dimmer to Auto if you are going to hard-wire your scanner inside your
vehicle.
1. Scroll to ‘Set Backlight’ and press E/ .
2. Scroll to ‘Set Dimmer’ press E/ .
3. Scroll to 1 of 2 options and press E/ .
For vehicle use - Scroll to ‘Auto’ and press E/ .