User Manual

5. Scroll to the Group that has the channel you want to edit and press E/ .

6. Scroll to ‘Edit Channel’ press E/ .

7. At ‘Select Channel’ scroll to the channel you want to edit and press E/ .

8. You can also press E/ when the channel is displayed in scan mode. (Press .No to cancel

storing a CTCSS/DCS tone or NAC code if asked).

9. Scroll to the options below and press E/ .

10. Press SCAN/SEARCH to return to scanning when done with editing.

Edit Name Set Attenuator

(conventional

only)

Volume Offset

Edit Frequency or

TGID

Set Priority Copy/Paste Channel

Set Audio Type

(conventional/

Motorola only)

Set Alert Delete Channel

Set Number Tag Set Record New Channel

Set Modulation

(conventional only)

Set Lockout

Edit Name if you do not enter a channel name, the scanner displays the frequency for

conventional systems or the talkgroup ID for trunked systems when it stops on a channel.

1. Scroll to ‘Edit Name’ and press E/ . See Entering Text.

2. Press E/ to save and exit.

Edit Frequency or TGID. See also ‘Entering IDs’.

1. Scroll to ‘Edit Frequency or TGID’ and press E/ .

2. Enter the frequency or ID and press E/ to save and exit.

Set Audio Type (Conventional/Motorola only) choose ‘Digital Only’ or ‘Analog Only’ according

to the signal type. Select ‘All’ if this channel might contain both digital and analog signals.

Notes: If you are sure the channel is analog, set the channel to ‘Analog Only’. This will

preventthe‘P25WaitingTime’fortheconventionalsystemorMotorolasitefromlosingthe

rstpartofthetransmissionuptothewaittimeyousetthere.

3. Scroll to ‘Set Audio Type’ and press E/ .

4. Scroll to one of three options and press E/ .

All - The scanner automatically determines whether the audio is analog or digital.

Digital Only - The scanner will receive the channel only if it is carrying APCO 25 digital

audio.

5. At ‘P25 NAC Option’ (conventional only) scroll to 1 of 2 options and press E/ .

Search - The scanner searches and displays any NAC tone with the transmission.

Set P25 NAC - Allows you to program a NAC code. See Entering Text.

Note: you can also store a (blinking) NAC code in when receiving a frequency in scan

mode by pressing E/ .

Analog Only - The scanner will receive the channel only if it is carrying analog audio.