Manualshelf

User Manual

ManualsBrandsUniden ManualsElectronicsDigital Mobile TrunkTracker V Scanner, 25,000 Dynamically Allocated Channels, Close Call RF Capture Technology, 4-Line Alpha display, Base/Mobile Design, Phase 2, Location-Based Scanning
71727374757677787980
70
To toggle between Display Modes 1, 2 or 3 Hold on any channel and press then 6(DISP).
Press Hold to resume.
To toggle System/Site/Search Quick Keys on or off for a Single Digit system/site/search, press the
number key assigned to the system/site/search.
To turn a Double-Digit system/site/search on or off, press .No rst then press the two number
keys.
To toggle Group Quick Keys on or off in current system press then the number key assigned to
the group.
To toggle Group Quick Keys on or off in another system press and hold to ‘lock’ Function
mode. Scroll to the (enabled) system that contains the (enabled) group you want to turn on/
off then press the corresponding number key(s). Press twice to ‘unlock’ Function mode and
resume.
To hold on a channel press Hold. To step through IDs/frequencies, turn the scroll control
backward or forward. Press Hold to resume.
To hold on a specic frequency Hold on any channel in a conventional system. Enter the new
frequency and press Hold. Press SCAN/SEARCH to exit.
To hold on a specic ID in the current site Hold on the site.
Enter the new ID (press .. [2 dots] for a dash-EDACS AFS) and press HOLD. Press HOLD to
resume.
To hold on any system/site/search press and hold to ‘lock’ Function mode. Press to ‘unlock’
Function mode to resume.
To edit the current channel press E/ .
To lock out a channel or frequency quickly press L/O once while the channel or frequency is in the
display to temporary lock out.
Quickly press L/O twice to lock out.
To lock or unlock a group see Locking/Unlocking Groups.
To lock out a conventional system/trunked site/search while receiving the system/site/search
quickly press E/ then L/O once to temporary lock out. Quickly press L/O twice to lock out.
To store a displayed ID into an Existing Group’ (ID Search) press E/ .
At ‘Quick TGID Save?’ press .No. See also Storing a Displayed ID.
To store a displayed ID into ‘Quick Save’ Group’ ID (ID Search) press E/ . At ‘Quick TGID
Save?’ press E/ .
See also Storing a Displayed ID.
To store a (blinking) CTCSS or DCS tone (for a conventional channel set to analog only), press
E/ . At ‘Set Found CTCSS/DCS?’ press E/ . Press SCAN/SEARCH to resume.
To store a (blinking) NAC code (for a conventional channel set to digital only), press E/ . At ‘Set
Found P25 NAC?’ press E/ .
Press SCAN/SEARCH to resume.
To store a search frequency (Search with Scan) press E/ .
Then see Storing a Displayed Frequency.
To toggle the attenuation for a conventional channel on or off Hold on the channel and press
then 7(ATT). Press HOLD to resume.