User Manual

82
Edit Custom Search Quick Search Auto Step Size Chart
Custom Search Searching
EDITING A SERVICE SEARCH
To Edit a Service Search:
1. Press MENU.
2. Scroll to ‘Search for...’ and press E/ .
3. Scroll to ‘Edit Service’ and press E/ .
4. Scroll to the service search you want to edit and press E/ .
5. Scroll to Set Delay Time and press E/ .
6. Scroll to the desired delay time (-10, -5, -2, 0, 1, 2, 5, 10, or 30 secs.) and press E/ to
save and exit.
7. A negative delay will force a resume after that number of seconds.
8. Scroll to Set Attenuator and press E/ .
9. Scroll to On or Off and press E/ to save and exit.
10. Scroll to Set Record and press E/ .
11. Scroll to On or Off and press E/ to save and exit.
12. Scroll to Set Audio AGC and press E/ . See also Adjust Audio AGC.
13. Scroll to ‘Analog’ and press E/ to toggle on or off.
14. Scroll to ‘Digital’ and press E/ to toggle on or off.
15. Press MENU to return.
16. Scroll to P25 Waiting Time and press E/ .
17. Set the Wait Time from 0 to 1000 ms and press E/ .
18. Scroll to Search with Scan and press E/ .
19. Scroll to Set Quick Key and press E/ .
(Used for ‘Search with Scan’ only):
1. Scroll to 0-99 or .No for no quick key and press E/ to save and exit.
2. Scroll to Set Startup key and press E/ .
3. Scroll to 0-9 or .No for no startup key and press E/ to save and exit.
4. Scroll to Set Number Tag and press E/ .
5. Enter 0-999 and press E/ .
6. Scroll to Set Lockout and press E/ .
(Used for ‘Search with Scan’ only):
1. Scroll to ‘Unlocked’, ‘Temporary L/O’, or ‘Lockout’ and press E/ to save and exit.
2. Scroll to Set Hold Time (the amount of time the search will search in Scan Mode) and press
E/ .
3. Enter the hold time (0-255 seconds) you desire and press E/ to save and exit. (0 will
search the whole band before continuing)