User Manual

Notes:
 If when you connect the AC adapter the [VOL] /Power Switch
is ON, the scanner may not power on. Should this occur,
simply turn the control OFF, then ON again.
 If the scanner loses power (as when you turn off your car’s
ignition with the scanner’s power switch on), it can lose some
system settings such as display color and backlight. To ensure
that such settings persist, either change the setting using the
scanner’s menu or power the scanner off then back on using
the power switch after making such setting changes.
When you turn off the scanner using the power switch, the scanner
remembers the last settings and mode. When you turn power back
on, it resumes the previous mode.
Base Station
This is the simplest approach to let you get started quickly. Decide
on a location that is convenient to a nearby wall outlet, has desk
space to let you complete your programming worksheets, will safely
allow the indoor antenna to be extended, or near a window to use
an outdoor antenna.
To secure the radio to a surface, by means of the mounting bracket,
follow the steps below: