User Manual

block while BLACK connects to the vehicle’s chassis ground (-
).
6. Connect the ORANGE lead to one side of the headlamp switch
so that when you activate the headlights, the scanner’s LCD
display changes intensity. Be sure all the connections are
routed away from any potentially pinching or slicing sheet
metal.
7. Slowly slide the scanner into the sleeve until it locks in place.
8. To remove the unit, fully insert the removal keys into each slot
on the left and right edges of the front panel. Carefully slide the
radio from the sleeve.
Note: If you plan to connect a GPS unit or external speaker at a
later time, expect to remove the unit for ease of making those
connections.
Removing the Scanner from the DIN-E Sleeve
If you plan to connect other devices or wires to the radio, such as a
GPS unit, at a later time, you should plan to remove the scanner
from the DIN-E sleeve. This is easily done using the provided
Removal Keys that come with the optional DIN-E sleeve.
Refer to the illustration that follows, showing the Removal Keys.
Fully insert both Removal Keys into the slots on the left and the right
edges of the radio’s dress panel. You cannot remove the radio with
only one key. Press in fully,and do not twist the keys. The radio will
unlock from the sleeve making withdrawal from the sleeve possible.
Store the keys in a safe place for future use.