User Manual

Mounting Using ISO Technique
Some vehicles can take advantage of another approach to
mounting a radio in a vehicle, called the ISO technique. However,
this technique requires a very detailed and thorough knowledge of
the technique. Therefore, we strongly suggest that if you have any
doubt about your experience and abilities, please consult with a
professional installer who is familiar with the ISO approach to radio
installation.
To begin the process, it is first necessary to remove the scanner’s
outer metal sleeve from the inner chassis. Unthread the four screws
in the rear of the unit. Slide the cover toward the rear and off. Once
the sleeve is removed, you will see threaded, metric machine screw
holes on either side of the chassis cabinet. Uniden does not supply
these screws. Their diameter, length, and screw type should be