User Manual

chosen by a qualified installer based on the internal vehicle bracket
which will be used in securing the scanner chassis.
Once the original radio is removed from the vehicle dash and the fit
of the scanner is correct, be sure to connect all the power, audio,
antenna, and any other cables or wires, to the scanner before the
scanner is secured.
The following illustration is a typical example of the ISO technique
and the general side mounting screw holes often encountered. It
does not actually represent the Uniden scanner nor your vehicle’s
mounting bracket. Only a professional installer will be able to
determine the best and correct approach.
Removing the Display Sticker
Before you use the scanner for the first time, remove the protective
plastic film over the display.
Connecting an Optional Antenna