User Manual

1. For each site or channel group, go to the Set
LocationInfo menu.
2. Check the range, latitude, and longitude settings to make
sure they are correct.
3. Make sure the Set GPS Enable option is set to Yes .
Please note that these pages are meant as general instructions.
While most of the information here applies to all scanners, some
options may not be available on certain scanner models. Model-
specific options are indicated in the text.
 Conventional Systems
 EDACS SCAT Systems
 EDACS Trunked Systems
 LTR Trunked Systems
 Motorola Trunked Systems
Digital scanners only
 Standard P25 Trunked Systems
 Single Frequency P25 Trunked Systems
General scanning information
Please note that these pages are meant as general instructions.
While most of the information here applies to all scanners, some
options may not be available on certain scanner models. Model-
specific options are indicated in the text.
 Radio Systems Overview
 Deciphering Trunked Systems
 Location-based Scanning
 Scanning Legally
This guide is optimized for the following web browsers: