User Manual

3. Select Search with Scan, then select Set Number Tag.
4. Enter the number tag you want to use for this search range.
To a custom search range :
1. Open the Search for... menu.
2. Select Edit Custom, then select the custom search range you
want to assign the number tag to.
3. Select Search with Scan, then select Set Number Tag.
4. Enter the number tag you want to use for this custom search
range.
Assigning a CHNT
 You can assign CHNTs to channels even if the system does
not have an assigned SNT. However, without an SNT, you can
only navigate to these channels from within that system itself.
 CHNTs can be duplicated within their own system, but you will
see a warning when you create multiples.
 CHNTs can range from 0 to 999 .
1. Open the Program System menu.
2. Select the system containing the channel you want to assign
the number tag to.
3. Select Edit Group, then select the channel group you want.
4. Select Edit Channel, then select the channel you want to
assign the number tag to.
5. Select Set Number Tag.
6. Enter the number tag you want to use for this channel.
Using Number Tags
To navigate
directly to:
Key Sequence
Example