User Manual

again, it will go to the 2nd channel assigned with that CHNT,
and so on).
Assigning an SQK
 Multiple systems, sites, and search ranges can share the
same SQK.
 All systems and sites assigned to the same SQK will be
enabled (or disabled) when you enter the Quick Key.
 SQKs range from 0 to 99 .
To a conventional system:
1. Open the Program System menu.
2. Select the system you want to assign the Quick Key to.
3. Select Edit Sys Option, then select Set Quick Key.
4. Enter the Quick Key you want to use for this system.
To a trunked system:
1. Open the Program System menu.
2. Select the system you want to assign the Quick Key to.
3. Select Edit Site, then select the site you want.
4. Select Set Quick Key, then enter the Quick Key you want to
use for this site.
To the Close Call Hits system :
1. Open the Close Call menu.
2. Select Hits with Scan, then select Set Quick Key.
3. Enter the Quick Key you want to use for the Close Call Hits
system.
To a service search range :
1. Open the Search for... menu.