User Manual

Using Quick Keys
 Quick Keys only work in Scan mode.
 Entering the Quick Key toggles the enabled/disabled state of
the system/site/search range or channel group (i.e., if the
system is currently enabled, entering the Quick Key will
disable it, and vice-versa).
To use SQK 0 through 9
 Enter Scan mode.
 Tap the number key that matches the SQK. (For example, if
the SQK is 4, just enter 4.)
 Any systems, sites, or search ranges assigned to this SQK
become disabled. (If they were already disabled, they become
enabled.)
To use SQK 10 through 99
 Enter Scan mode.
 Tap the decimal point ( ./NO ), then enter the SQK. (For
example, if the SQK is 32 , enter ./NO / 32.)
 Any systems, sites, or search ranges assigned to this SQK
become disabled. (If they were already disabled, they become
enabled.)
To use a GQK
 Enter Scan mode.
 Go to the system that contains the channel group you want to
enable or disable.
 Tap FUNCTION , then tap the number key that matches the
GQK. (For example, if the GQK is 7 , enter FUNCTION / 7.)