User Manual

6. Go back to the Edit Group menu and repeat these steps with
any other sites you want to program for this system.
Remember: You have to turn on Set GPS Enable before the
location information can effect that site or channel group.
Programming general locations
You can program general locations (i.e., locations that are not
associated with a site or channel group). There are three types of
general locations:
 points of interest ( POI )
 intersections ( Dangerous Xing )
 roads ( Dangerous Road )
You can program the scanner to alert you when you come within a
designated distance of that location.
To create a new location
1. Open the Program Location menu.
2. Select the type of location you want to create.
3. Select New Location to create a new location of this type.
4. *If you want to create a different type of location, go back to
the Program Location menu and select that location type.
5. If you want to change the default location name, select Edit
Name and enter a new name.
6. Select Set LocationInfo and enter the latitude and longitude for
this location.
7. Select Set Range and enter the distance from this location you
want the scanner to alert you.
8. Choose the Alert Tone and Alert Light you want the scanner to
use when you come within range of this location.