User Manual

3. Select the location you want to edit, then change any of the

location settings you want.

Your scanner can trigger alerts for several different events. The

table below shows the different alerts and how to program them:

To sound an alert when

Follow these steps

A channel becomes

active

Edit the channel properties (Edit

Channel#Set Alert):

1. Go to the Program System menu

and select the system that

contains the channel you want set

the alert for.

2. Select Edit Group , then select the

group you want.

3. Select Edit Channel, then select

the channel you want to set the

alert for.

4. Select Set Alert .

5. Choose the Alert Tone and Alert

Light you want the scanner to use.

An active Talk Group on

a system contains an

emergency flag

Edit the system properties (Edit Sys

Option#Emergency Alert):

1. Go to the Program System menu

and select the system you want

set the alert for.

2. Select Edit Sys Option, then

select Emergency Alert .

3. Choose the Alert Tone and Alert

Light you want the scanner to use.

The scanner detects a

Close Call hit

Edit the Close Call properties:

1. Go to the Close Call menu.