User Manual

2. Select Set CC Alert .
3. Choose the Alert Tone and Alert
Light you want the scanner to use.
4. For Close Call Alerts, you can
also have the scanner pause
before it resumes searching.
Select Set CC Pause to activate
this feature.
The scanner gets a hit on
a Tone-Out channel
Edit the Tone-Out channel properties:
1. Go to the Tone-Out for... menu.
2. Select Tone-Out Setup , then
select the Tone-Out channel you
want to set the alert for.
3. Select Set Alert .
4. Choose the Alert Tone and Alert
Light you want the scanner to use.
You approach a
particular location
 Point of
Interest( POI )
 Dangerous Road
 Dangerous
Intersection
( Dangerous Xing )
Edit the location properties:
1. Go to the Program Location menu
and select the type of location you
want set the alert for.
2. Select the particular location.
3. For a POI, select Set Alert , then
choose the Alert Tone and the
Alert Light you want to use.
4. For a Dangerous Road or Xing,
the alert tone is preset. Select the
Alert Volume and the Alert Light
you want to use