Use and Care Manual

10
TROUBLESHOOTING
In the event of system malfunction, perform the following
procedures:
Problem Suggestion
Unit does not power up • Check power cord connections.
• Check fuse.
• Check vehicle electrical system.
No reception • Check microphone connection.
• Set CB/PA to CB.
• Check VOLUME and SQUELCH.
• Check antenna.
• Check antenna connection.
• Set LO/DX to DX.
Poor Reception • Check VOLUME and SQUELCH.
• Be sure antenna SWR is normal.
• Set LO/DX to DX.
No Transmission • Set CB/PA switch to CB.
• Check microphone connection.
• Set HI/LO to HI.
Low Transmission • Set HI/LO to HI.
If you do not get satisfactory results after performing the above checks,
call the Uniden Customer Service Center at 1-800-297-1023, 8:00 a.m. to
5:00 p.m. CST, Monday through Friday.
SERVICING YOUR TRANSCEIVER
Technical information, diagrams, and charts are provided on request. It
is the user's responsibility to see that this radio is operating at all times
in accordance with the FCC Citizens Radio Service regulations. We highly
recommend that you consult a qualified radio/telephone technician for
servicing and aligning this CB radio product.
When ordering parts, be sure to specify the correct model number and serial
number of the unit.