Owner`s manual
9
4c. Turn SQUELCH back
clockwise until the hiss stops.
Only clearer signals get
through.
Set SQUELCH only when the radio is not receiving a strong signal.
5. Turn the RF Gain knob to set the RF gain sensitivity to Local or
Distance.
6. Press MIC Gain to adjust the microphone sensitivity.
TO TRANSMIT
Perform a voltage Standing Wave Ratio (SWR) measurement prior to using the
transmitter. A SWR ratio in excess of 2:1 may damage the transmitter.
Be sure to read and understand Part 95, FCC Rules and
Regulations before operating your transmitter.
1. Select a channel.
2. Press MIC Gain to adjust the microphone
sensitivity.
3. When the channel is clear, press
the PTT button and speak. Release the
button when you have nished speaking.
You can also transmit while you are on emergency channels 9 or19. Press
the
PTT
button to transmit emergency information.
PREVENTIVE MAINTENANCE
Every six months:
1. Check the Standing Wave Ratio (SWR).
2. Be sure all electrical connections are tight.
3. Inspect antenna coaxial cable for wear or breaks in shielding.
4. Be sure all screws and mounting hardware are tight.
PTT