CEZAI 998
Contents Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . 3 Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Overview . . . . . . . . . . . . . . . . . . . . . . . 5 Main Phone Features . . . . . . . . . . . . . . Answering Machine Features . . . . . . . . Parts of the Base and Corded Handset Parts of the Cordless Handset . . . . . . . Parts of the Cordless Handset Charging Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 35 36 36 36 37 38 39 40 Using Caller ID and Call Waiting . . . . . . . . . . 41 Using the CID Announce (Base Only) . . . . 42 Viewing Caller ID Information . . . . . . . . . . . 42 Deleting Information from the Caller ID List 43 Setting Up the Answering Machine . . . . . . . . 45 Features . . . . . . . . . . . . . . . . . . . . . . . Selecting a Language . . . . . . . . . . . . . Setting the Record Time (or Announce Only) . . .
Congratulations on purchasing your new Uniden Corded/Cordless Telephone! Your new phone system comes with a corded base unit and a cordless handset. The corded base allows you the convenience, safety and security to make and receive calls during a power failure. In addition to the corded base, your new phone has a full featured cordless handset and charger that can be placed anywhere in your home where you have AC power and it does not require you to plug the handset in to a telephone line.
Base The main part of the phone that connects to your phone line and lets you make and receive calls. Corded A handset connected to the Base. It Handset can make and receive calls during a on the Base power failure. Charger A cradle that charges the handset battery. It connects to power but does not connect to a phone line. Emergency Dial One touch speed dial key for your most important or most frequently called number. CID Caller ID is available from your telephone provider.
Main Phone Features • • • • • • • • • • • • 5.
Top view 1 2 3 4567 8 9 10 15 16 17 18 11 12 13 19 20 21 14 22 23 24 25 1. 2. 3. 4. 5. 26 27 in use light [cid] key One-touch speed dial [A] key One-touch speed dial [B] key Base visual ringer ww w. un i de n. co m 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27.
P R O D U C T O V E RV I E W Side and Rear view 31 32 33 34 35 28 29 36 30 28. 29. 30. 31. 32. [ 7 ] P RO D UC T O VE RV I E W ringer tone button ringer on/off switch Curl cord jack visual ringer hi/lo/off switch CID Announce on/off switch 33. 34. 35. 36. DC IN 9V jack phone jack Base antenna Wall mount adapter www.uniden.
1 6 2 3 4 7 8 9 10 14 15 16 5 11 12 13 ww w. un i de n. co m 17 18 19 20 21 1. 2. 3. 4. 5. 6. 7. 8. 22 9. 23 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23.
3 1 1. Charging contacts 2. Charge light 3. DC IN 9V jack 2 [ 9 ] P RO D UC T O VE RV I E W www.uniden.
USI NG T HE IN TE RFAC E Using the Interface Using the Base Menus • • • • Press [menu/set] on the base to access the base main menu. Use [select/+] or [select/-] to scroll through options. Press [menu/set] on the base to make a selection. For your convenience, voice prompts will guide you through the base main menu (except LCD Contrast and Dial Mode settings). • To cancel your selection and return to standby, press [ ] (play/stop) on the base.
Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: Avoid heat sources, such as radiators, air ducts, and sunlight Avoid television sets and other electronic equipment Avoid noise sources such as a window by a street with heavy traffic Avoid microwave ovens Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock Avoid personal computers Choose a central location Avoid other cordless telephones
I N S TA L L I N G T H E P H O N E Connecting the Base and Corded Handset 1) Connect the corded handset curl cord to the left side of the phone and to the corded handset. 2) Route the curl cord inside the molded wiring channel as shown. 3) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. CAUTION: To avoid risk of fire and shock, only use the Uniden AD-1007 AC adapter. 4) Route the AC adapter cord inside the molded wiring channel as shown.
There’s an easy way to test your connection: try making a call from your base. If your call connects, your phone’s settings are fine. If your call does not connect: 1) Check the AC adapter cord. Make sure it is securely connected to the DC IN 9V connector and to a standard AC power outlet. 2) Change Dial Mode (Instructions below). Changing the Dial Mode Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing.
Your new phone has visual ringers located at the top of the base unit and at the top of the cordless handset. These visual ringers will flash during incoming calls, so if you are in a noisy work environment you will be able to see when the phone is ringing. The phone comes with a switch for base visual ringer control, so you can turn the visual ringers off when you do not want the base to flash brightly during incoming calls.
I N S TA L L I N G T H E P H O N E Wall Mounting the Base This phone can be mounted on any standard wall plate. 1) Remove the wall mount adapter from the base and snap it into the notches on the bottom of the base. 2) Plug the AC adapter to the DC IN 9V jack. CAUTION: To avoid risk of fire and shock, only use the Uniden AD-1007 AC adapter. 3) Route the AC adapter cord inside the molded wiring channel as shown. 4) Plug the AC adapter into a standard 120V AC wall outlet.
If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the base and handset.
The cordless handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the charger. 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. CAUTION: Use only the Uniden AD-310 AC adapter. 2) Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward. 3) Make sure that the charge light illuminates.
I N S TA L L I N G T H E P H O N E Installing the Beltclip Line up the holes on each side of the cordless handset. To attach the beltclip, insert into the holes on each side of the handset. Press down until it clicks. To remove the beltclip, pull either side of the beltclip to release the tabs from the holes. Installing the Optional Headset Your cordless handset may be used with an optional headset. To use this feature, insert the headset plug into the headset jack.
Selecting a Language for your Answering Machine and Base Display You can set the language of your base menu display and answering machine announcements to English, French, or Spanish. 1) Press [menu/set] on the base. 2) Press [select/-] to move the pointer to select LANGUAGE, and then press [menu/set]. 3) Press [select/+] or [select/-] to choose ENGLISH, FRANÇAIS (French), or ESPAÑOL (Spanish). 4) Press [menu/set]. You will hear a confirmation tone.
6) Press [select/+] or [select/-] to choose AM or PM, and then press [menu/set]. You will hear a confirmation tone. Note: Use [ ] (delete) to edit the hour and minute. Adjusting the Base Display (LCD Contrast) You can adjust the contrast or brightness of the text that appears on your base display. Choose one of ten levels for optimum viewing. 1) Press [menu/set] on the base. 2) Press [select/-] to move the pointer to select LCD CONTRAST and then press [menu/set].
Note: If the area code has already been stored in memory, the stored area code will be displayed. To change it, use [ ] (delete) and the number keys to enter the new area code. Setting Caller ID on Call Waiting (CIDCW) Caller ID on Call Waiting (CIDCW) displays the name and number of an incoming call while you are on the line. 1) Press [menu/set] on the base. 2) Press [select/-] to move the pointer to select CIDCW, and then press [menu/set].
3) Press [select/intercom] to toggle between ENG (English), FR. (French) and ESP (Spanish). 4) Press [menu] to complete the setting. The handset returns to standby. Setting AutoTalk AutoTalk allows you to answer the phone simply by removing the cordless handset from the cradle. You do not have to press any keys to answer the call. 1) Press [menu] on the cordless handset. 2) Press [select/intercom] to turn AutoTalk on. 3) Press [menu] to complete the setting. The handset returns to standby.
Your corded base phone and cordless handset comes with a special Emergency Speed Dial [ ] key that is already preprogrammed to dial 911 when pressed. This key can be re-programmed with another special emergency dial number of your choice by following these steps: 1) With the phone in standby, press and hold the Emergency Dial [ ] key on the base or the cordless handset. If the Emergency Dial number is already programmed, the Edit screen appears.
The base has 4 one-touch speed dial locations ([A], [B], [C] and [D]) that can be programmed for special or frequently dialed numbers. Use the following steps to set up these speed dial numbers: 1) With the base in standby, press and hold [A], [B], [C] or [D]. If the key already has a number programmed, the Edit screen appears. You can select EDIT NUMBER to edit this entry, select DELETE NUMBER to erase this entry or select GO BACK to return to the previous screen.
Your cordless handset allows you to store up to 10 names and numbers for quick and easy dialing of frequently called numbers. These 10 speed dials are not limited to just phone numbers. You can store any number (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. For example, you can save your bank account number to a speed dial.
If the selected speed dial number is already assigned, the Edit screen appears. You can select MAKE A CALL to dial the number, select EDIT MEMORY to edit this entry, select DELETE MEMORY to erase this entry, or select GO BACK to choose another speed dial number. /CMG C %CNN 4) Enter a name according to the instructions below. The name can be up to 14 characters. Use [∗/tone/ ] and [#/ ] to move the cursor to the desired location. Use [delete/channel] to delete characters as needed.
1) Press [6] once to enter M. Then press [#/ ] to move the cursor to the right. Number of times key is pressed keys 2 3 4 5 6 7 8 9 1 2 ABC 3 DEF 2) Press [6] six times to enter o. 4 GHI 3) Press [8] six times to enter v. 6 MNO 4) Press [4] six times to enter i. 1 5 JKL 7 PQRS 8 TUV 5) Press [3] five times to enter e. 9 WXYZ 6) Press [7] eight times to enter s. 0 oper 5) Press [select/intercom]. STORE NUMBER is displayed.
7) Press [select/intercom]. You will hear a confirmation tone. 8) After about 2 seconds, the speed dial entries will appear. 9) Press [memory] to exit memory setup mode. The phone returns to standby. Caller ID names & numbers shown in the Caller ID list can be stored to a speed dial location. For instructions on viewing the Caller ID information, see page 42. If the Caller ID information did not include the phone number, then you will not be able to store it.
U S IN G Y O U R P H O NE 3) Enter a number [0-9] or press [volume/ /+] or [volume/ /-] to select the memory location to be stored. 4) Press [select/intercom]. You will hear a confirmation tone, and the number is stored in memory. The display returns to the Caller ID data. Note: If a message has already been stored in the selected memory number location, a confirmation screen is displayed. Press [volume/ /+] to select YES. Press [select/intercom] to overwrite. The display returns to the Caller ID data.
Making and Receiving Calls Making a call From the cordless handset From the base speakerphone* From the base corded handset 1) Pick up the handset from the cradle. 2) Press [talk]. 3) Listen for the dial tone. 4) Dial the number. OR 1) Remove the handset from the cradle. 2) Dial the number. 3) Press [talk]. 1) Press [talk]. 2) Listen for the dial tone. 3) Dial the number. OR 1) Dial the number. 2) Press [talk]. 1) Pick up the corded handset. 2) Listen for the dial tone. 3) Dial the number.
To switch a call from the corded handset on the base to the base speakerphone, press [talk] on the base. To switch from a base speakerphone call to the base corded handset, pick up the corded handset. Making a Call from the Base Emergency Dial or Speed Dial Locations Simply press the Emergency Dial [ ] key or one of the four (4) One-touch Speed Dial [A-D] keys on the base, and your phone will automatically dial the number. To cancel, press [talk] on the base.
Making a Call from a Caller ID Listing You can place a call from the Caller ID list. 1) Press [cid] on the base or [CID] on the cordless handset. 2) Select the phone number that you want to dial by pressing [select/+] or [select/-] on the base, or [volume/ /+] or [volume/ /-] on the handset. 3) To have the phone dial a 1 before the displayed Caller ID number for placing a long distance call, press [1]. To have the phone dial the stored area code before the displayed Caller ID number, press [3].
U S IN G Y O U R P H O NE 2) Press [flash] on the base or cordless handset to accept the waiting call. After a short pause, you will hear the new caller. 3) To return to the original caller, press [flash] on the base or handset again. Tip: You must subscribe through your local telephone company to receive Call Waiting service. Redialing the Last Number Dialed From the cordless handset 1) Pick up the handset from the cradle. 2) Press [talk]. 3) Listen for the dial tone. 4) Press [redial/pause].
Adjusting the Ringer, Earpiece and Speaker Volume Adjusting the Base Ringer Ringer on/off: The ringer on/off switch allows you to set the base ringer on or off. If you set the switch to off, the base ringer will be silent. Ringer tone: Press the ringer tone button in standby to select one of 7 ring tones. Ringer volume: The base has ten settings for ringer volume. 1) With the phone in standby, press [select/+] or [select/-].
Base Speakerphone: You can select eight different volume levels for the base speaker. To adjust the base speaker volume while on a call, press [select/+] (to make it louder) or [select/-] (to make it softer). This setting will remain in effect after the telephone call has ended. Base Corded Handset: You can select the earpiece volume from among four volume levels. To adjust the earpiece volume of corded handset while on a call, press [select/+] (to make it louder) or [select/-] (to make it softer).
Selecting a Different Channel If you encounter interference while using your cordless handset, you can manually change the handset's channel for clear operation. While using your handset, press [delete/channel]. SCANNING appears on the display, indicating the handset is changing to another channel. For more information on interference, refer to Radio Interference on page 66. Finding the Lost Handset If you misplace the cordless handset, press [page/hold] on the base.
U S IN G Y O U R P H O NE Conferencing With this phone system, up to three people can participate in a conference call while using an outside line, the cordless handset, and the base. Joining a Conference Call You can easily join a call already in progress. From the cordless handset Joining the conference call Exiting the conference call From the base speakerphone From the base corded handset During a call from the base, press [talk] on the handset.
Intercom The intercom feature lets you communicate between the cordless handset and base without using the phone line. You can make an intercom call while an outside caller is on hold; making an intercom call will not terminate the call on hold. If the party does not answer within one minute, the operation is canceled. Making an Intercom Page From the cordless handset 1) Press [select/intercom]. 2) The base will be paged. Making an An intercom tone sounds.
On the cordless handset With the base speakerphone With the base corded handset 1) Pick up the handset from the cradle. (If AutoTalk is on, the phone answers automatically when you pick up the handset from the charging cradle.) Answering Press [page/hold] or 2) Press [select/intercom] or [talk]. an Intercom OR [talk]. Page If the handset is off the cradle, press [select/intercom] or [talk]. (If AutoTalk is on, you can press any key in the twelve number keypad.
Tone Dialing Switch Over If your telephone company requires pulse dialing, you can switch to tone dialing after the call connects. This feature is useful when you need tone dialing to use automated menu systems, such as telephone bank tellers, telephone prescription refills, customer support menus, etc. select/ intercom If your phone is set to pulse dialing, make your call normally. Once your call connects, press [∗/tone] on the base or press [∗/tone/ ] on the cordless handset.
If you subscribe to Caller ID service from your telephone company, your phone will show you the caller’s phone number and name (if available) whenever a call comes in. If you subscribe to both Caller ID and Call Waiting, the phone will show you the name and number of any call that comes in while you are on the line. Caller ID information is stored for up to 50 incoming calls - even unanswered calls.
The CID Announce feature is a Caller ID that Talks and verbally announces from the base the name of incoming callers when you receive a call. To use this feature, you must subscribe to Caller ID service from your telephone company and you must have the CID Announce switch set to on. Viewing Caller ID Information With a Caller ID subscription from your local telephone company, you have two different ways to view Caller ID information.
Deleting Information from the Caller ID List The cordless phone stores up to 50 Caller ID names and numbers. If the phone receives the 51st Caller ID, the oldest one in the list is automatically deleted. Individual Caller ID data can also be deleted manually by following these steps: 1) Press [CID] on the cordless handset ([cid] on the base) while in standby.
1) Press [CID] on the cordless handset ([cid] on the base) while in standby. 2) Press [delete/channel] on the cordless handset ([ base). ] (delete) on the 3) Press [volume/ /+] on the cordless handset ([select/+ ] on the base) to select YES, and then press [select/intercom] on the cordless handset ([menu/set] on the base). &GNGVG #NN! ;GU 0Q You will hear a confirmation tone and all Caller ID information is deleted. ww w. un i de n.
The phone has a built-in answering machine that answers and records incoming calls. You can also use your system to announce a special outgoing message to callers when you are away from your phone.
Setting the Record Time (or Announce Only) You can select how long a caller has to record a message. You have three record time options. The options 1 MINUTE or 4 MINUTES set the duration for recording the incoming messages. ANNOUNCE ONLY answers the call and plays either your personal greeting or the pre-recorded system greeting, but prevents the caller from leaving a message. 1) Press [menu/set] on the base. 3) Press [select/+] or [select/-] to select Record Time 1 MINUTE, 4 MINUTES, or ANNOUNCE ONLY.
4) Press [menu/set]. You will hear a confirmation tone. Setting the Number of Rings The ring time setting allows you to set the number of rings the caller hears before your answering machine plays the outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver, the answering machine picks up after two rings if you have new messages and after four rings if there are none. 1) Press [menu/set] on the base.
3) Press [select/+] or [select/-] to select ON or OFF. 4) Press [menu/set]. You will hear a confirmation tone. To quickly turn off the Message Alert tone, press any key on the base unit; the tone will automatically quiet until you receive another new message. Setting Your Greeting "Hello, no one is available to take your call. Please leave a message after the tone." Or you can record your own personal outgoing greeting. Your recorded greeting must be between 2 seconds and 30 seconds long.
Note: • Position yourself as close to the base as possible and speak clearly when recording your greeting. • If you make an outside call or a call is received during the new greeting recording, the operation is canceled. • The greeting must be more than two seconds long, or it will not be recorded. • To delete the personal greeting, press [ ] (delete) while the message is playing. The system announces "Greeting has been deleted.
3) Enter a two-digit Security or PIN code (01-99) using the number keypad. To change the number, use [ ] (delete) to backspace. 4) Press [menu/set]. You will hear a confirmation tone. Using Your Answering Machine The message counter on the base display will show the number of messages you have waiting. If NEW appears in the base display and flashes, you have new messages waiting that you have not yet listened to.
The base display indicates the number of messages you have waiting. When you have new messages, the answer on/off light on the base will flash and NEW will appear in the base display and flash. The answering machine plays your new messages first. After you listen to all of your new messages, you can then play your old messages. To review your messages from the base: Playing messages ] (play/stop). The system announces the number of new With the phone in standby, press [ and old messages.
Screening Calls Your phone allows you to listen to callers leaving a message without answering the phone. You can always hear callers from the base speaker. To screen an incoming call, make sure your phone has Call Screening activated. To activate this feature, please see page 46. • To adjust the volume, press [select/+] or [select/-] on the base. • To answer the call, pick up the corded handset or press [talk] on the base. ] (play/stop).
Command Function Command Function [0] then [1] Repeat a Message [0] then [6] Answering System On [0] then [2] Play incoming Messages [0] then [7] Memo Record/Stop* [0] then [3] Skip a Message [0] then [8] Greeting Message Record/Stop* [0] then [4] Delete a Message [0] then [9] Answering System Off [0] then [5] Stop Operation [1] then [0] Voice Prompts * For Memo Record and Greeting Message Record, the first time you enter the corresponding command, it starts the recording automatical
Specifications Operation Temperature -10°C to +50°C (+14°F to +122°F) For the Base AC Adapter Handset Battery Frequency For the Charger Part Number AD-1007 AD-310 Input Voltage 120V AC, 60Hz 120V AC, 60Hz Output Voltage 9V DC @500mA 9V DC @210mA Part Number BT-905 Capacity 600mAh, 3.6V DC 925.181424 - 927.451379 MHz 5739.320225 - 5746.130091 MHz Note: To avoid damage to the phone use only Uniden AD-1007, AD-310 and BT-905 with your phone.
With average use, your battery talk time will be approximately 5 hours and standby time will be approximately 10 days. For optimum performance, be sure to return the cordless handset to the charging cradle after each call. If the cordless handset is left off of the charger, the actual talk time duration will be reduced respective to the amount of time the handset is off the cradle.
Caution: • Use only the specified Uniden battery pack (BT-905). • Do not remove the batteries from the handset to charge it. • Never throw the battery into a fire, disassemble, or heat it. • Do not remove or damage the battery casing. Installing the Rechargeable Battery for Cordless Handset 1) Press down on the cordless handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.
To maintain a good charge, clean the charging contacts on both the cordless handset and charger once a month. Dampen a cloth with plain water. Gently rub the damp cloth over the charging contacts until all visible dirt is removed. Dry the contacts thoroughly before returning the handset to the cradle. Caution: Do not use paint thinner, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish. [ 5 7 ] M A I N T E N AN CE www.uniden.
Troubleshooting Traveling Out of Range During a call, if you move your cordless handset too far away from your base, noise may increase. If you pass the range limits of the base, your call will terminate within one minute. Common Issues Symptom Suggestion The charge light won't illuminate when the cordless handset is placed in the cradle. • Make sure the AC adapter is plugged into the cradle and wall outlet. • Make sure the cordless handset is properly seated in the cradle.
Suggestion During power failure, can't make or receive a call. • Make sure to use corded handset to make or receive a call. • Make sure that telephone cord is firmly connected. The cordless handset doesn't ring or receive an intercom page. • • • • • Severe noise interference. • Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances.
Symptom Suggestion After a power failure, the outgoing message is deleted. • Record your personal outgoing message again. The default message should remain. No sound on the base speaker during call monitoring or message playback. • Adjust the speaker volume on the base. • Make sure the call screen feature is set to on. • Make sure you are using the correct PIN code.
Moisture and liquid can damage your cordless phone. • If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal. • If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow the steps below: Cordless Handset 1) Remove the battery cover and leave it off for ventilation.
Precautions! Before you read anything else, please note the following: Warning! Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium Battery Warning ww w. un i de n.
Uniden works to reduce lead content in our PVC coated cords in our products and accessories. Warning! The cords on this product and/or accessories contain lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1.
The FCC Wants You To Know The REN is used to determine the number of devices that may be connected to a telephone ww w. un i de n. co m P RE CA U T I O NS [ 6 4 ] PRECAUTIONS This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
Should you experience trouble with this equipment, please contact Uniden customer service at 800-297-1023. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are very destructive to [ 6 5 ] P RE CA UT I O NS telephone equipment connected to AC power sources.
the FCC RF exposure guidelines were also met when used with the Uniden accessories supplied or designed for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided. Radio Interference ww w. un i de n. co m Cordless Telephone Privacy Cordless telephones are radio devices. Communications between the handset and base of your cordless telephone are accomplished by means of radio waves which are broadcast over the open airways.
Radio Equipment Terminal Equipment The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of communications may not be ensured when using this telephone".
Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale.
[ 6 9 ] O N E Y E A R L I M I T E D W AR RA N T Y return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Service 4700 Amon Carter Blvd. Fort Worth, TX 76155 As an Energy Star® Partner, Uniden has determined that this product or product models meets the Energy Star® guidelines for energy efficiency. Energy Star® is a U.S. registered mark. www.uniden.
Index D, E, F, G, H AC adapter information ............ 54 Answering machine Remote operation .................. 52 Reviewing messages ............ 51 Setup ..................................... 45 Turning on & off ..................... 50 Audio boost .............................. 35 Dial mode ..................................13 Earpiece volume .......................35 Emergency dial ...................23, 31 Finding the lost handset ............36 Greeting ..............................
Memo [71] www.uniden.
Remote Operation Card C UU TT C C UU TT C REMOTE OPERATION CARD Remote access away from home Turn on the answering system remotely 1. Call your phone number from a touch-tone phone. 2. During the outgoing message, press [0] and enter your PIN code. The answering system announces the number of messages stored in memory and the voice prompts. The phone stands by for you to enter a command. 3. To quit, hang up the phone. 1. Call your phone and let it ring 10 times until it answers. 2.
Remote Operation Card CC UU TT CC UU TT MEMORY LOCATION MEMO Memory Location Name Phone Number 6 7 8 9 10 Task CC UU TT 6 7 8 9 10 Name 0 0 0 0 0 0 0 0 0 1 1 2 3 4 5 6 7 8 9 0 CC UU TT MEMORY LOCATION MEMO Memory Location Key Repeat a Message Play Incoming Messages Skip a Message Delete a Message Stop Operation Answering System On Memo Record/Stop Greeting Message Record/Stop Answering System Off Voice Prompts Phone Number Task Repeat a Message Play Incoming Messages Skip a Message Delete a
At Uniden, we'll take care of you! Thank you for purchasing a Uniden product. If you have any questions or problems, please do not return this product to the place of purchase. Our customer care specialists are here to help you! Visit our web-site at Having trouble? www.uniden.com or call our Customer Service Hotline at 1-800-297-1023 during regular business hours.* To order headsets, accessory handsets, replacement batteries, or other Need a part? accessories, visit our website at www.uniden.
UCZZ01056ZZ(0)
