Specifications

12
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Remove the wall mount adapter from the base and snap
it into the notches on the bottom of the base.
2) Plug the AC adapter to the DC IN 9V
jack.
CAUTION: To avoid risk of re and shock, only
use the Uniden AD-314 AC adapter.
3) Route the AC adapter cord inside the molded wiring
channel as shown.
4) Plug the AC adapter into a standard 120V AC wall
outlet.
5) Plug the telephone line cord into the
phone jack.
6) Route the telephone line cord inside the molded wiring
channel as shown.
7) Plug the telephone line cord into the telephone outlet.
8) Align the mounting slots on the base with the mounting
posts on the wall. Then push in and down until he phone
is rmly seated.
9) On the base unit, pull the corded handset retainer out of
the slot. Rotate it clockwise 180 degrees.
10) Flip the retainer from front to back. Slide it back into the
slot so that the lip of the retainer is up and the oval is
down. The retainer holds the corded handset in place.