Owner's Manual

15 - English
To... Press...
scroll through the lists
DOWN
to scroll from newest to oldest.
UP
to scroll from oldest to newest.
dial the current number
Talk/FlasH
or
sPeakeR
on the handset.
Pick up the corded handset on the base.
add other digits or codes
at the front of CID number
to add
1
for a toll call.
# to add (or remove) the area code.
close the lists
PHONeBOOk
.
Once you display a CID or redial entry, you can delete it or add it to a
phonebook.
You can also add CID entries to a call block list, or delete all of them.
To... Press...
delete the current number
MeNU
, then select
Delete
.
add the current number to
this station's phonebook.
MeNU
, then select
Store Into PB
. The phone displays
the
Edit Name
screen (see page 16).
add the current number to a
call block list (CID only)
MeNU/Ok
, then select
Add Call Block
. The phone
displays the
Edit Name
screen (see page 16).
delete all the CID entries
MeNU
, then select
Delete All
.
Deleting All Numbers in the CID List
Press
MeNU/Ok (
or
MeNU
on the base) and select
Recent Calls/Caller ID
. Select
an entry, press the appropriate
MeNU
key, and then select
Delete All
. When the
phone prompts you to confirm, select
Yes
.
Using Call Waiting
If you get a Call Waiting call, the phone can sound a tone and display any CID
information received for the waiting call. Press
FlasH/DeleTe
on the base or
Talk/
FlasH
on the handset to switch between your current call and the waiting call;
remember, each time you switch, there is a short pause before you're connected
to the other caller.
Using the Phonebook
Each station can store up to 200 entries in its phonebook.
To... Press...
open/close the phonebook
MeNU
(base) or
MeNU/Ok
(handset) and select
Phonebook
.
scroll through the entries
DOWN
to scroll through the entries from A to Z.
UP
to scroll from Z to A.