Owner's Manual

18 - English
Call Blocking Entry Options
With the phone in standby, open the menu, select
Call Blocking
then
View
Number
; scroll through the entries. Press
MeNU/Ok
to open the individual entry.
Choose one of these options:
Choose this... To...
Edit
Edit this entry. The phone will prompt you to edit the name &
phone number.
Delete
Erase this entry from the list & allow calls from this number.
Blocking a Number
With the phone in standby, open the menu, select
Call Blocking,
then
Create New
.
Enter the name and number to be blocked. Press
MeNU/Ok
to save the entry
Adjusting the Base Visual Ringer
Visual Ringer
The visual ringer blinks for the following
conditions:

New messages

Incoming call - outside line

Incoming call - page

Incoming call - intercom or intercom hold
You can change the brightness of the base visual
ringer. The
VisUal RiNgeR
switch is on the right-hand side of the base. Slide the
switch to
HIgH
,
Low
, or
off
. (It doesn't affect the audio ringers.)
Using the Audio Boost
You can increase the earpiece volume for normal calls and intercom calls.
During a call, press
BOOsT
. Press
BOOsT
again to turn off.
Silent Mode

You can silence the ringers on the base and all handsets at the same time. It
doesn't affect the visual ringers.

With the phone in standby, press and hold
sileNT
on the base. The phone
automatically turns on the answering system and shows
Silent Mode On
in the
display on each station. (The answering system answers any incoming calls
without playing anything through the speaker.)

To cancel, press and hold
sileNT
again.
#
If you turn the answering system off while Silent Mode is on, the phone
turns off Silent Mode.
Using Multi-Station Features
#
To use the features in this section, you need at least 1 cordless handset.