Owner's Manual

19 - English
Expanding Your Phone

Your base supports a total of 12 cordless handsets, including any that came
with your phone.

You must register accessory handsets to the base before using them.
Handsets that aren’t registered display a "not registered" message. For
registration instructions, see ppage 27 or the accessory handset manual.
Using Conference Calling

When an outside call comes in, the base and two cordless handsets can join
in a conference call with the outside caller.

To join the call, just pick up the corded handset from the base or press
Talk/
FlasH
on a cordless handset. To leave the conference call, hang up normally;
the other station remains connected to the call.
Using Privacy Mode

To activate Privacy Mode on a call in progress, select
Call Privacy
from the
menus. As long as privacy mode is on, no other handsets can join your call.

Privacy Mode turns off automatically when you hang up or put the call on
hold..

To use privacy mode during a conference call, wait until all stations have
joined the call before turning on Privacy Mode. If a station disconnects, that
station cannot rejoin the call as long as Privacy Mode remains on.
Call Transfer
To... From the base From a cordless handset
transfer a call
1. Select
Hold/Transfer
from the menus.
2. The phone puts the call on hold. Select the station you
want to page, or
All
to page all stations.
When the other station accepts the call, you'll be
disconnected, but you can join the call again.
cancel a transfer Press
iNTeRCOM/HOlD
. Press
eND/CleaR
.
accept a
transferred call
1. To answer the page and speak to the transferring station,
pick up the corded handset. press
Talk/FlasH
.
2. To accept the call, press
Talk/FlasH
(handset) or
FlasH
(base).
Intercom

Whenever the phone is in standby, you can make an intercom call between
stations without using the phone line.

You can make an intercom call from any station, but only two stations can
be in an intercom call at any time.