Owner's Manual

[58] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
Screening a call
From the base
To screen an incoming call, do the following steps as follows:
1) After the answering system answers, the base speaker will let
you hear the calls as the machine records the message. To
adjust the volume, press
ring/volume/
∧
or
ring/volume/
∨
.
To mute the call screen temporarily, press
play/stop
when the
system is answering.
2) To answer the call, press
(speaker)
or pick up the handset
from the base (when AutoTalk is set to On). If the handset is
away from the base, press
talk/flash
,
speaker
or any number
key,
*
/tone/
←
, or
#/
→
(when Any Key Answer is set to On).
The answering system will disconnect automatically.
From the handset
1) Press
select/

when the system is answering.
To mute the call screen temporarily, press
end
when the system is answering.
2) To answer the call, press
talk/flash
, otherwise press
end
to cancel the call screen and the
system return to standby mode.
•If you press talk/
flash, call screen will
be canceled and the
handset is put in
talk mode.
•If you press
select/

while another
handset is screening a
call, you will hear a
beep and you can not
screen a call.
note
THE INTEGRATED
ANSWERING DEVICE
UP323BH(DCT6485) OM ENG.book 58 ページ ２００３年１０月２４日 金曜日 午前１０時５６分