Owner's Manual

[66] EXPANDING YOUR PHONE
www.uniden.com
Register the Handset to the Base
If you purchase an extra handset, you need to register the handset to the base before
use. Only one handset can be registered at a time.
The handset ID for the supplied handset(s) was assigned by
the factory. Factory-registered handset have Handeset #1,
#2 or #3 in the display (#2 for models that have two
handsets in packaging, and #3 for models that have three
handsets in the packaging). When you register additional
handset to the base, the handset ID will be assigned.
1) Before registering the extra handset, the
battery pack MUST be charged for 15-20
hours.
2) Place the extra handset in the main base
unit to begin registration.
3) While the handset is registering,
Handset
Registering
will appear in the LCD.
When
Registration Complete
is displayed,
the handset has been registered to the base.
If
Registration Failed
appears, please try
these steps again.
2NCEGJCPFUGV
QPOCKPDCUG
VQTGIKUVGT
4GIKUVTCVKQP
%QORNGVG
Extra Handset
Extra Handset
Charger
Charger
Main Base
Extra Handset
+
Main Base
Charge the handset
for 15-20 hours.
Place the extra
handset in the main
base to register.
1
2
3
4
•An extra handset can
be registered when
the main base is in
standby mode.
•Standby Mode -
The handset is not in
use and talk/flash
has not been pressed.
note
EXPANDING YOUR
PHONE
UP323BH(DCT6485) OM ENG.book 66 ページ ２００３年１０月２４日 金曜日 午前１０時５６分