Owner's Manual

EXPANDING YOUR PHONE [69]
www.uniden.com
From the base to a handset
1) Press
intercom
on the base in standby mode.
2) Select the handset you want to talk with by pressing number key (
1
-
4
).
To page all the handsets press
*
/tone.
3) Follow the steps 3-4 under “From handset to handset or to the base.”
Call Transfer Feature
From handset to handset or to the base
1) During a call, press
hold/transfer/int'com
on the handset.
2) Select a handset or the base to transfer the call within
10 seconds. (Refer to step 2 in the intercom section on
page 68).
The call will automatically be placed on hold, and an
intercom tone sounds.
To cancel the transfer, press
talk/flash
or
speaker
on the initiating handset.
3) On the receiving handset, to answer the page, press
talk/flash
or
hold/transfer/int'com
(or
(speaker)
or
intercom
on the base). Or press any number key,
*
/tone/
←
, or
#/
→
(when Any Key Answer is on), or pick up the handset from the cradle (When Auto Talk is
on).
4) To speak to the caller, press
talk/flash
(or
(speaker)
on the base) on the receiving handset.
*QNFVQVTCPUHGT
*CPFUGV
$CUG
EXPANDING YOUR
PHONE
UP323BH(DCT6485) OM ENG.book 69 ページ ２００３年１０月２４日 金曜日 午前１０時５６分