Welcome Congratulations on your purchase of the Uniden DCX730 accessory handset and charger. You can place this fully featured cordless handset anywhere your home has AC power. Note: Illustrations in this manual are used for explanation purposes. Some illustrations may differ from the actual unit. Accessibility Uniden provides a customer service hotline for accessibility questions.
Compatible Bases This handset is compatible with Uniden's 2.4 GHz Digital Expandable phone system: the DCT736/DCT738 series, the DCT746/DCT748 series, the DCT756/DCT758 series, the DMX776/778 series, and the DCT646/DCT648 series. Visit www.uniden.com for the most up-to-date list of compatible bases. Installing the Accessory Handset Checking the Package Contents Make sure your package contains the following items. If any items are missing or damaged, contact our Customer Service Hotline.
Charging the Accessory Handset The handset is powered by a rechargeable battery pack that automatically recharges when the handset is placed in the charger. 1. Connect the AC adapter to the DC IN 9V jack and to a 120V AC outlet that is not controlled by a wall switch. Caution: Use only the Uniden AD-0005 adapter. 2. Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward. 3. Make sure that the charge LED illuminates.
For DCT73 and DCT75 Series Bases (DCT736, DCT738, DCT756, DCT7565, DCT758, DCT7585) To register to a DCT73 or DCT75 series base, place the accessory handset in the base. While the handset is registering, HANDSET REGISTERING appears in the LCD. When REGISTRATION COMPLETE is displayed, the handset has been registered to the base. If REGISTRATION FAILED appears, remove the handset from the base and try again. For Other Base Models 1.
Resetting the Handset If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset. 1. Press and hold [ ] and [#/ ] for at least 5 seconds, until the SYSTEM RESET menu appears. 2. Select the DEREGISTER HS submenu by pressing [select/ ]. WHICH HANDSET? appears in the display. 3. Use [ ] or [ ] to select the handset ID to be deregistered from the list, and then press [select/ ].
Using the Interface Parts of the Handset 1. Antenna 2. Speaker phone speaker and ringer 3. Battery compartment 4. New message LED 5. Earpiece 6. LCD display 7. [menu/clear] 8. [redial/pause] 9. [ /flash] (talk/flash) 10. [ ] (phonebook) 11. [∗/tone/ ] 12. [xfer/intercom] (transfer/intercom) 13. [select/ ] (select/messages) 6 14. [ ] (up) 15.[ ] (end call) 16. [ ] (Caller ID) 17. [ ] (down) 18. [#/ ] (pound) 19. [ ] (speaker) 20.Microphone 21.
Reading the Display The handset display uses icons to tell you the status of your phone. The table below lists the icons and what they mean. ICON STATUS DESCRIPTION Standby/ Talk The battery icon indicates the handset battery status: full, medium, low, and empty. Standby The ringer off icon indicates that the ringer is turned off. Talk The mute icon appears when you mute the handset. Talk The call record icon appears while recording a conversation.
To use this four-way key, place your thumb over the key on the handset and move to the four positions to get the feel of how it moves and operates. Using the Handset Menus To open the menu, press [menu/clear]. Select the option you want by pressing the four-way function key. This will move the cursor; the option currently selected has a triangle beside it. Activate the selected option by pressing [select/ ]. To exit the menu and return to standby, press [ ].
Scroll through the records To scroll through the records from A to Z, press [ ]. To scroll trough the records from Z to A press [ ]. Jump to records that Press the number key corresponding to the letter start with a certain you want to jump to. letter Store a record in the Find the record you want to store and press phonebook [select/ ]. Dial a record Find the entry you want to dial and press [ /flash] or [ ]. Delete a record Find the entry you want to dial and press [menu/clear].
Press [ ] to enter the phonebook. Once in the phonebook, you have the following options: Scroll through the entries To scroll through the phonebook from A to Z, press [ ]. To scroll through the phonebook from Z to A press [ ]. Jump to entries that start with a certain letter Press the number key corresponding to the letter you want to jump to. Store a new entry Move the cursor to STORE NEW, then press [select/ ]. 1.Move the cursor to COPY and press [select/ ]. 2.
Hold, Conference, Transfer, and Intercom Put a call on hold Press [xfer/intercom]. If you leave a caller on hold for more than five minutes, the call will be disconnected. To return to the party on hold, press [ /flash] or [ ]. Join an inprogress call To join a call already in progress, press [ /flash] or [ ]. You can hang up normally; the other station remains connected to the call. Press [xfer/intercom]; the call is placed on hold.
Muting the Microphone To mute the microphone so the caller can't hear you, press [menu/clear]. Move the cursor to select MUTE and then press [select/ ]. MUTE ON and appear in the display. Repeat the procedure to cancel muting. Privacy Mode To prevent other stations from interrupting a call, press [menu/clear]. Move the cursor to select PRIVACY MODE and then press [select/ ]. PRIVACY MODE ON and P appear in the display. Repeat the procedure to turn off privacy mode.
Play messages Press [ /2]. The system plays the message then announces the time and date the message was received. Repeat a message Press [ /1] to go to the start of the current message. Press [ /1] repeatedly to go back to a previous message. Skip a message Press [ /3] to go to the beginning of the next message. Delete a message While a message is playing, press [∅/4]. The message is permanently deleted. End message review Press [ /5] to stop the message playback.
4. Enter your access number (up to 20 digits). If you need the phone to wait before sending the next digits, press [redial/pause] to insert a two-second pause. For a longer pause, press [redial/pause] multiple times. Each pause counts as one digit. 5. Press [select/ ] when you are finished. Once you program your access number, press [select/ ] to dial your voice mail service.
Caution: - This equipment contains a rechargeable Nickel-MetalHydride battery. - Do not remove the batteries to charge them. - Never throw the battery in a fire or disassemble or heat it. - Do not remove or damage the battery casing. - Nickel is a chemical known to state of California to cause cancer. - Do not short-circuit the battery. - Do not charge the battery used in this equipment in any charger other than the one designed to charge this battery as specified in the owner's manual.
Privacy of communications may not be ensured when using this phone. To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCC's exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used with the Uniden accessories supplied or designed for this product.
One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale.
At Uniden, we'll take care of you! Thank you for purchasing a Uniden product. if you have any questions or problems, please do not return this product to the place of purchase. Having trouble? Need a part? Help for our customers with special needs Our customer care specialists are here to help you! Visit our website at www.uniden.com or call our Customer Service Hotline at 1-800-297-1023 during regular business hours.
UUZZ01616BZ(0)
