DECT 6015 DECT 6015+1 Series DECT6015 OM.
Table of Contents Welcome ....................................................................... 4 Terminology Used in this Manual ............................. 5 Manual Conventions ................................................ 5 Expanding Your Phone ............................................. 19 Adding Accessory Handsets .................................. 19 Using Multiple Bases ............................................. 21 Product Overview .......................................................
Using Caller ID, Call Waiting, and Redial Lists ....... 30 Using the Caller ID List ......................................... 30 Making a Call from a Caller ID Record .................. 30 Deleting Caller ID Numbers ................................... 31 Using Call Waiting.................................................. 31 Redialing a Number ............................................... 31 Deleting a Redial Record ....................................... 32 Maintenance ..................................
3 DECT6015 OM.
Welcome Thank you for purchasing a Uniden Multi-Handset phone. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. 4 DECT6015 OM.
Terminology Used in this Manual Standby The handset is not in use. If it is off the cradle, no line has been activated. No dial tone is present. CID Caller ID is available from your Telephone provider and is offered to users on a subscription basis. With this service, you will be able to see the incoming caller information such as name and phone number. CID/CW or CIDCW Caller ID with Call Waiting is available by subscription from your Telephone provider.
Product Overview Features • 1.8GHz DECT6.0 Expandable System • Expands up to 6 Handsets • Caller ID/Call Waiting • Store 30 Caller ID Numbers • Advanced Phonebook Features: • Store 70 Phonebook Entries • Alphabetical Search • Personalized Ring by Party • Transfer Single Listing or Entire Phonebook • Speakerphone on Handset • 7 Ringer Options on Handset (3 Tones/4 Melodies) • Last 5 Number Redial • Call Transfer • Conferencing • Intercom 6 DECT6015 OM.
Parts of the Phone The following illustrations show you all of the different parts of your phone. Handset 1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
Base PREMIUM DECT 23 Interference Free Communication 24 25 23. 24. 25. 26. 27. 26 27 Base charging contacts charge LED [find hs] key (find handset) DC IN 9V jack TEL LINE jack 8 DECT6015 OM.
Using the Interface Reading the Display The handset display uses icons to tell you the status of your phone. The table below lists the icons and what they mean. Icon Status Description Standby/Talk The battery icon indicates the handset battery status: full, medium, low, and empty. :OFF P Standby The ringer off icon indicates that the ringer is turned off. Talk The mute icon appears while the handset microphone is muted. Talk The speaker icon appears when the handset speaker phone is in use.
Using the Four-way Function Key Your handset has a four-way function key that allows you to move the cursor or pointer on the display and access the most commonly used features at the touch of a button. By moving this key to the left, you open the phonebook. Move the key to the right to access Caller ID information. To use this four-way key, place your thumb over the key on the handset and move to the four positions to get the feel of how it moves and operates.
Entering Text from Your Handset You can use the number keypad on your handset to enter text by referring to the letters printed on each number key. When you press the number key in a text entry field, the phone displays the first letter printed on the number key. Press the number key twice to display the second letter and three times to display the third. Capital letters are displayed first, then lower case letters, and then the number on the key.
Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: • The location should be close to both a phone jack and a Avoid noise sources such as a window by a street Avoid heat sources, such continuous power outlet (one with heavy traffic as radiators, air ducts, which is not connected to a and sunlight switch).
Installing the Battery Use only the Uniden BT-652 rechargeable battery pack supplied with your cordless telephone. Follow the steps below to install the handset battery. 1) Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery cable into the battery jack. Be sure to match the red and black wires to the label near the jack. The cable should snap into place. Gently pull on the battery cable.
Installing the Belt Clip Line up the holes on each side of the handset. To attach the belt clip, insert into the holes on each side of the handset. Press down until it clicks. To remove the belt clip, pull either side of the belt clip to release the tabs from the holes. Connecting the Base and Charging the Handset 1) Route the AC adapter cord through the “LOOP” of base’s back as shown. 2) Connect the AC adapter to the DC IN 9V jack.
Connecting to the Phone Line Route the cord. 1) Once the battery pack is fully charged, route the telephone cord through the “LOOP” of base’s back as shown, and connect the telephone cord to the TEL LINE jack. 2) Connect the telephone cord to a telephone wall jack. Testing the Connection Try making a call. If your call does not connect or you cannot get a dial tone, try the following steps: 1) Make sure the AC adapter cord is securely connected to the DC IN 9V jack and a standard power outlet.
Wall Mounting the Base This phone can be mounted on any standard wall plate. 1) 2) 3) 4) 5) Snap the wall mount adapter into the notches on the base’s back. Plug the AC adapter into the DC IN 9V jack. Plug the AC adapter into a standard 240V AC wall outlet. Plug the telephone cord into the TEL LINE jack. Route the telephone cord through the hole of the wall mount adapter as shown. 6) Plug the telephone cord into the telephone wall jack.
Basic Setup Activating Personal Ring You can assign special ringer tones to anyone in your phonebook. When your phone gets a call, it looks up the Caller ID information in your phonebook. If you’ve assigned a personal ringer to that number, the phone uses it so you know who is calling. To turn the personal ringing on or off, follow these steps: 1) Press [Menu/Select]. Select the HANDSET SETUP menu, and then Personal Ring the PERSONAL RING submenu. On 2) Move the cursor to select ON or OFF.
Name Tag Name Tagging works with the caller display number from Caller ID. You will need to subscribe to the Caller ID feature with your phone company for Name Tagging to work. When the phone rings, the received caller display number is compared to numbers stored in the phonebook. If there is a match then any name stored with the phonebook number will be displayed. To change the Name Tagging setting, follow the steps listed below. 1) Press [Menu/Select].
Expanding Your Phone Adding Accessory Handsets Your phone supports a total of six cordless handsets. You can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger. All the handsets ring when a call is received. Compatible Handsets Your phone is compatible with the DECT 6005. If you purchased an accessory handset separately, you must register the handset to the base before use. Accessory handsets will not operate until they are registered.
Registering DECT 6005 Accessory Handsets If you purchase an accessory handset, you need to register the handset before use. Handset(s) supplied in the box with the base are pre-registered at the factory. When charged, pre-registered handsets display a handset ID number. Handsets that have not been registered display: Handset not registered-place handset on base to register. See your Owner's Manual for help. To register an accessory handset: 1) Charge the handset for 15-20 hours.
Using Multiple Bases DECT 6005 handsets and the handsets supplied with your phone can be registered to a total of four different DECT6015 or DECT6035 bases. Once your handset is registered to more than one base, you can set the handset to search automatically the available base, or you can select manually which base the handset should connect to (for example, if you have one base with an answering machine, you can tell the handset to connect that base to check messages).
4) When the base is found, the handset will return to standby. If the base is not found, “SEARCHING” continues to appear. You can repeat the procedure listed above to return back to the original connection or to find the different base. Notes: • You cannot change bases during a call. • To confirm which bases the handset is registered to, open the SELECT BASE submenu and use [ [ ] to scroll through the list. Press [ ] to close the list and return to standby.
4) Enter the number for this entry (EDIT NUMBER). Once you have stored a name, EDIT NUMBER appears next. Use the number keypad to enter the phone number; the phone number can contain up to twenty digits. If you need the phone to pause between digits when it’s dialing (for example, to enter an extension or an access code), press [Redial/ Pause] to insert a two-second pause. You will see a P in the display. You can also use more than one pause together if two seconds is not long enough.
Editing an Existing Phonebook Entry 1) When the phone is in standby, press [ ] to open the phonebook. 2) Find the entry you want to edit and press [Menu/Select]. 3) Select EDIT. Follow the steps for Creating Phonebook Entries on page 22. If you do not wish to change the information at any step, simply press [Menu/Select] to go to the next step. Storing Caller ID or Redial Numbers in the Phonebook You can store Caller ID records or redial numbers in the phonebook so you can use them later.
To delete all phonebook entries: 1) When the phone is in standby, press [ ]. 2) Press [Menu/Select], and then select DELETE ALL. DELETE ALL? appears in the display. 3) Move the cursor to select YES. 4) Press [Menu/Select]. You will hear a confirmation tone, and DELETED! appears in the display.
Programming One-Touch Voice Mail Access You can program your voice mail access number to the Voice Mail key [ /Mute] on each handset so you can get your messages at the touch of a button. Your voice mail service provider will supply you with the access number. This number may be simply a phone number. To edit the voice mail number, follow the steps below: Edit V-mail No. 1) Press [Menu/Select]. 2) Move the cursor to select the HANDSET SETUP menu and press [Menu/Select].
3) Press [Menu/Select]. You will hear a confirmation tone. Note: When you have multiple bases and even if the handset ID is changed when you switch to a different base, the handset will keep the banner name. Selecting a Ring Tone You may choose from four melodies or three tones for your phone’s primary ring tone. Each handset can use a different ring tone or melody. The available ring tones are as listed: 1) Press [Menu/Select]. Select the HANDSET SETUP menu, and then the RINGER TONES submenu.
Using Your Phone From a cordless handset Making a call Answering a call Hanging up 1) 2) 3) 4) OR 1) 2) 3) From a handset speaker phone Pick up the handset from the cradle. Press [ /Flash]. Listen for the dial tone. Dial the number. Pick up the handset from the cradle. Dial the number. Press [ /Flash]. 1) Pick up the handset. (If AutoTalk is on, the phone will answer when you pick up the handset from the cradle.) 2) Press [ /Flash]. (If Any Key Answer is on, you can also press any key on the dial pad.
Making a Call from the Phonebook 1) When the phone is in standby, press [ ] to open the phonebook. 2) Find the phonebook entry you want to call (see Finding a Phonebook Entry on page 23). 3) Press [ /Flash] or [ ] to dial the number. Note: You can also press [ /Flash] or [ ] before you open the phonebook. When you come to the phone number you want to dial, press [Menu/Select].
Using Caller ID, Call Waiting, and Redial Lists If you subscribe to Caller ID service from your phone company, your phone will show you the caller’s phone number and name (if available) whenever a call comes in. If you subscribe to Caller ID on Call Waiting, the phone will also show you the name and the number of any call that comes in while you’re on the line. Using the Caller ID List You can store up to thirty Caller ID numbers in each handset. Caller ID records are stored from newest to oldest.
Deleting Caller ID Numbers To delete only one Caller ID number, press [ ] when the phone is in standby, and then find the number you want to delete. Press [Menu/Select] and select DELETE ENTRY. When the phone asks you to confirm, select YES. To delete all the Caller ID numbers, press [ ] when the phone is in standby, and then press [Menu/Select]. When the phone asks you to confirm, select YES. Note: When you delete a Caller ID number, you delete it permanently.
Deleting a Redial Record If you want to delete a phone number from the handset’s redial list, follow the steps below: 1) When the phone is in standby, press [Redial/Pause]. 2) Use [ ] and [ ] to scroll through the redial list. 3) When you find the redial number you want to delete, press [Menu/Select] and select DELETE ENTRY. 4) When the phone asks you to confirm, select YES. The redial number is deleted.
Adjusting the Audio Tone If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call. Your phone gives you three audio tone options: low, natural and high; the default setting, Natural Tone, is recommended for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone. To adjust the audio tone: 1) While on a call, press [Menu/Select]. 2) Move the cursor to select AUDIO TONE, and then press [Menu/Select].
Conferencing If you have more than one handset, up to three people can participate in a conference call. A three-way conference call consists of an outside line and two handsets. You can easily join a call already in progress. The handsets must be currently connected to the same base (see page 21). 1) Press [ /Flash] or [ ] to join the call. 2) To hang up, return the handset to the cradle or press [ ]. The other party will still be connected to the call.
Using Special Features Privacy Mode If you don’t want other handsets to interrupt you while on a call, turn on privacy mode. As long as your handset is in privacy mode, other handsets can’t join your call or make any calls of their own: their displays will show UNAVAILABLE. 1) While on a call, press [Menu/Select]. 2) Select CALL PRIVACY. PRIVACY MODE ON appears in the display for two seconds; appears and remains in the display until the feature is turned off.
Answering an Intercom Page When the intercom page tone sounds, the display will show the ID of the handset that is paging. 1) Press [ /Flash] or [Clear/Int’com]. If AutoTalk is on, the handset will automatically answer the page when you pick up the handset from the cradle. 2) To hang up an intercom call, press [ ]. Muting the Ringer (One call only) While the phone is ringing, press [ ] to mute the ringer for this call. The phone will ring again on the next call.
Line Mode Setup (Base only) The Line Mode Setup feature is only used in instances where you have multiple phones where users may pick up an extension while someone else is on the phone. Only in very rare instances where your phone system is not detecting that an extension phone is picked up will you ever need to change this feature. There are three settings for this feature: TYPE-A, TYPE-B, or OFF, but change this option only when instructed to by customer service.
Maintenance Specifications Operating Temperature 32° F to 122° F (0° C to 50° C) Base: AAD-041S AC Adapter Part Number Charger: AAD-600S Base: 240V AC, 50 Hz AC Adapter Input Voltage Charger: 240V AC, 50 Hz AC Adapter Output Base: 9V DC @ 350mA Voltage Charger: 9V DC @ 210mA Battery Part Number BT-652 Battery Capacity 2.4V DC @ 650mAh Notes: • Use only the supplied AC adapters. • Be sure to use the proper adapter for the base and any chargers.
Cleaning the Battery Contacts To maintain a good charge, clean the charging contacts on the handset once a month. Dampen a cloth with plain water. Gently rub the damp cloth over the charging contacts until all visible dirt is removed. Dry the contacts thoroughly before returning the handset to the cradle. Caution: Do not use paint thinner, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.
Troubleshooting Resetting the Handset You may need to reset your handset in the following instances: • You lose a handset and purchase a new one. • You get the message Registration Failed when you try to register the handset. • You are unable to register any handsets to the base. • When you register new handsets to the base, the handset IDs do not match. (For example, the handset registers as “Handset #4” but you only have two handsets.
Resetting the Handset Without the Base If your original base is not available for some reason, you can still reset the handset and use it with another base. 1) Press and hold [ ] and [#] for at least five seconds. 2) Move the cursor to select BASEUNAVAILABLE and then press [Menu/Select]. 3) Select the base which you want to de-register from, and then press [Menu/Select]. 4) Move the cursor to select YES, and then press [Menu/Select].
Common Issues If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please visit Uniden’s customer support page at www.uniden.com.au (Australian model) or www.uniden.co.nz (New Zealand model). Symptom Suggestion The charge LED won’t illuminate when the handset is placed in the cradle. • Make sure the AC adapter is plugged into the base or the charger (if you have more than one handset) and wall outlet.
Symptom Suggestion The Caller ID does not display. • The call was placed through a switchboard. • Call your telephone provider to verify your Caller ID service is current. There may be a problem with your Caller ID service. The handset doesn’t ring or receive a page. • Make sure that you are not too far from the base. • Make sure that your handset is registered to the base. • Charge the battery in the handset for 15 to 20 hours. You cannot register the handset at the base.
Liquid Damage Moisture and liquid can damage your cordless phone. • If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal. • If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow the steps below: Handset Base 1) Disconnect the AC adapter from the base, cutting off electrical power.
Precautions! Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm.
Memo 46 DECT6015 OM.
Memo 47 DECT6015 OM.
Index A Answering calls............................ 28 Any key answer ........................... 27 AutoTalk ....................................... 27 B Banner ......................................... 26 Base Installing ................................... 14 Multiple Bases .......................... 21 Parts of the base ........................ 8 Wall mounting .......................... 16 Battery Battery life ................................ 39 Installing ...................................
Finding entries.......................... 23 Making a call from .................... 29 Storing Caller ID or redial numbers ............................ 24 Privacy mode ............................... 35 W Wall mounting the base ............... 16 Warranty ...................................... 50 R Redial Deleting a record ...................... 32 Making a calls with ................... 31 Ringer Muting ...................................... 36 Personal ring ............................
ONE YEAR LIMITED WARRANTY UNIDEN DECT 6015 and DECT 6015+1 CORDLESS PHONE IMPORTANT : Evidence of original purchase is required for warranty service. WARRANTOR : Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warranty only available in original country of purchase.
© 2007 Uniden Australia Pty Limited Uniden New Zealand Limited Printed in China UCZZ01902BZ(0) DECT6015 OM.