DECT1820 EXTRA HANDSET OWNER'S MANUAL OWNER'S MANUAL
Welcome Congratulations on your purchase of the Uniden DECT1820 optional handset and charger. This expansion handset is compatible with models in the following series: DECT1825, DECT1825+1, DECT1855 and DECT1855+1 (Model numbers may vary.) Each model within this series will support up to six handsets. You can place a fully featured cordless handset anywhere in your home as long as AC power is available to connect the handset's charging cradle.
Installing Your Expansion Handset Follow these three easy steps to get your new handset ready to use: 1 Connect the charger. 2 Install the batteries and charge your new handset for 15-20 hours. 3 Register your new handset to the main base. Step 1:Connect the Charger 1 Connect the AC adapter to the DC IN jack and to a standard 240V AC wall outlet. 2 Set the charger on a desk or tabletop. • Use only the supplied AC adapter. Do not use other AC adapter.
Step 2:Install the Batteries and charge your new handset for 15-20 hours 1 Remove the battery compartment cover. Press down on the semi-circle indent and slide the cover off. 2 Charge the battery for 15-20 hours before using. To charge the batteries, place the handset on the charger. While charging, the symbol scrolls and when the battery is fully charged, all the bars of the battery symbol will be filled when the phone is off the cradle.
On the DECT1820 handset you want to register: 1. Press to access the main menu. menu/ok 2. Press up or down key until "Add.Settings" is displayed and press . menu/ok Press up or down key to display "Register" and press .Press up or down key to select your base number and press menu/ok menu/ok . On your original base: Press and hold find handset for approx. 3 seconds until you hear the registration tone. You are now in ‘registration mode’.
If you have more than one handset registered to your base you can de-register a handset or the bases registered to use. Before deregistering, make sure all handsets and the base are in standby mode. 1 Press menu/ok to access the main menu. 2 Press up or down key until Add. Settings is displayed and menu/ok press . 3 Press up or down key to display Deregister and press menu/ok 4 Press up or down key to select Handset or Base and press . menu/ok .
Using Your Expansion Handset Now that your new handset is registered, it can perform all the same functions as the handsets originally included with your phone. With your new handset, you can • Transfer calls between handsets • Use two handsets as 2-way radios in DirectLink (Walkie-Talkie) mode • Hold conference calls • Access the integrated answering device or voice mail using Handset See the owner's manual that came with your main base for complete instructions on operating your new expanded phone.
Battery Information Low battery alert If the symbol is displayed on the handset, "Charge Battery" appears and you hear the low battery tone, you will need to recharge your handset. We recommend that you place the handset back on the charger between use to ensure that it is always fully charged. Cleaning the battery charging contacts To maintain a good charge, clean the charging contacts on the handset once a month. Dampen a cloth with plain water.
Quick Guide Function Make a call Preparatory call Button press talk , enter number. Enter number, Adjust earpiece volume During a call, End a call Receive a call Redial Privacy . talk rdl or talk . .
Store phonebook number then menu/ok, select New Entry, name, menu/ok , enter number, menu/ok menu/ok ,enter . Select Tone,menu/ok , then select Save, Dial phonebook number Handset ringer melody then menu/ok rdl or then rdl , talk menu/ok . .
Warranty UNIDEN DECT1820 Cordless Phone Limited One Year Warranty Please keep your sales docket as it provides evidence of warranty.
© 2005 Uniden Australia Pty Limited/Uniden New Zealand Limited Printed in China UUZZ01429ZZ(0)
