CONTENTS Precautions Installation Considerations. 2 . . . . . . . . . . . . . . . . . . . . . . .2 Important Safety Instructions. . .. .... . .. .. .... . .. .3 Important Electrical Considerations. . . . . . . . . . . . . . . . .4 Introduction ~ ~ ~ ::s V) ~ ~ ~ ~ :::> ~ ~ 0 Welcome 5 Features 5 Included In Your Package 6 Introduction Installation and Adjustment DeskInstallation Wall Installation 7 7 Installing the Handset Battery Pack. ...............
PRECAUTION Beforeyoureadanythingelse,pleaseobservethefollowing: Warning! z0~ ::q ~ ~ ::J ~ ~ 0 ~ "'" I~ ~ UNIDEN DOES NOT represent this unit to be waterproof. To reduce risk of fire, electrical shock or damageto the unit, DO NOT expose this unit to rain or moisture. Rechargeable . Nickel-Metal Hydride Battery Warning The rechargeable Ni-MH battery contained in this equipment may explode if disposed of in fire. .
IMPORTANTSAFETYINSTRUCTIONS When using your telephone equipment, these basic safety precautions should always be followed to reduced the risk of fire, electrical shock, and injury: 1. Do not use this product near water; for example, near a bathtub, shower, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Do not overload wall outlets and extension cords, as this can result in the risk of fire or electrical shock. 3. Never spill liquid of any kind on the product. 4.
IMPORTANT ELECTRICAL . CONSIDERATIONS , Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This phone is no exception. A Please do not attempt to unplug any appliance during an electrical storm. Telephone Line Problems If you are having trouble with your telephone your phone to determine is the cause, you must leave it disconnected A ...
. WELCOME' Congratulations onyourpurchase of theUnidenDS70 cordless telephone. This phoneisdesigned for reliability,longlife andoutstanding performance utilising thelatestin 900MHz DigitalSpreadSpectrum Technology. ~ Z 0 ~ ~ ~ ~ Z P::: ~ ~ 0 ~ FEATURES . . . . . . . . . 15channels(Aust),7 channels(NZ) 900MHz Digital SpreadSpectrumTechnology 20 Memory Dials(16 digitsmaximumper memory) 32Digit Redial Redial,Flashand PauseDialling ToneDialling CallWaitingCompatible Page .
'. . INCLUDEDIN YOURPACKAGE. GJ ..", "... 0--, 0,"0" To get the most phone, owner's please manual from your read this thoroughly. Be sure to complete the product and mail registration form. Handset If any of these missing items or damaged, your place are contact Base ~ Rechargeable Battery AAD 900S AC Adaptor of purchase. Telephone Cord Adaptor (Australia Only) ~ Belt Clip 6 ~ Long Telephone Cord/Plug Desk Stand . This Owner'sManual . RegistrationCard .
DESK INSTALLATION' Your DS70 can be fitted with a Desk Stand or mounted on the wall. Beforeconnecting your phoneline,fully chargethe Nickel-MetalHydridebattery packfor 15-20hours. . Thread both the telephone line cord and the power cord through the semi-circle hole in the back of the Desk Stand. . Insert the two tabs, located on the base of the Desk Stand, into the slots on the bottom of the Base Unit. . Push down gently until the tab locks into the top of the Base Unit. .
G A Before D you plug the other end of the telephone into the modular cord CHARGING page QEJ jack on the wall, charge the battery PACK, New Zealand Phone socket Australia (See THE BATTERY IC) D 11). I Power point 1. Plugthe AC adaptor into a standard 240VAC walloutlet and switchON. 2. Chargethe battery (SeeCHARGING THE BATIERY PACK, page 9). 3. Plug the other end of the phone cord into the telephone jack on the wall. 4. Raise the antenna to a vertical position.
INSTALLING THE HANDSET BATTERY PACK 1. Press and slide the battery cover off. Use only Uniden Battery 2. Align the plastic connector of the Nickel Metal Hydride battery with its socket and plug it in. supplied with your phone. EJ 3. Place the battery pack inside. 4. Slide the battery cover back until it snaps into place.
T Low battery indicator The low battery indicator shows when the battery pack is very low and needs to be charged. If the phone is not in use, the Low batt LED flashes every four seconds. If the phone is in use, the Low bait LED flashes every four seconds and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base for charging. T Recharging the battery pack Replace the handset on the base if it's convenient.
INSTALLING THEBELTCLIP T To attach the beltclip . Press the beltclip handset The handset mounted cannot against the rear of the until it clicks into place. be wall with the beltc1ip installed. I T To remove the beltclip . to release.
12 ~ HEADSET INSTALLATION A Use only the Uniden HS91O/HS900 headset. Your phone may be used with an optional headset, the Uniden HS91O/HS900. To use this feature, simply plug the headset into the headset jack. Your phone is ready for hands-free conversations. ~ ~ headset jack A A Keep the headset wire away from handset and base antennas. AUTOMATIC DIGITALCODESECURITY Topreventotherpartiesfrommakingunauthorised callsonyourphoneline,a digitalcodewasaddedto theDS70.
MAKING AND RECEIVING CALLS A ... Basic phone operation Referto the CONTROLS& FUNCTIONS diagramat the back of this Owner's Manual. When Handset On Base When Handset Off Base - """""""""",',; .Q To answer a call $ Press anykey Pick up handset. .... mmi. Ill-. -... a-a I To make a call 1. Pick up the handset. 1.PressTalk/End. 2. PressTalk/End. 2. Listen 3. Listen for the dial tone. 3. Dial the number. for the dial tone. 4. Dial the number.
CALL WAITING T For Australian AUSTRALIA Version Using the Call Wait feature The Call Wait + 2 call waiting procedure toggles incoming and original (and between the call visa versa). The Call Wait will drop connection incoming + 1 procedure the current call and pick up the If the Call Waiting tone sounds, press Call Wait then 2 to accept the waiting call (Aust only). -GRTo return to the original caller press Call Wait then 1 (Austonly). call on hold.
. .-. STORING A PHONENUMBER IN MEMORY 1. Make surethe handset is in standbymode (In Use lightis OFF). 2. Press the Memory button on the handset.(the In Use light will begin flashing 3. Enter the phone number,up to 16digits 4. Press Memory again 5. Enter the two digitmemory locationnmber (0120) on the keypad(the In Use lightwill stopflashing and you willhear twoconflfmationbeeps. 6. Repeatthese stepsto storeadditionalphone numbers. The pause button counts as one digit.
3 WAY CHAT FUNCTION (CONFERENCING) While on a call you can make another call to a third person and hold a 3 way conversation. T To establish a 3 way chat (conference) while on a call: 1. Press the Recall button to put the current caller on hold. 2. Wait for dial tone. 3. Dial the third person's phone number. 4. When the third person answersthe call, press the 3-Way Chat button to connectboth callersto yourself. T To establish a 3 way chat (conference) a second incoming call: while on a call with 1.
~ Z 0 ::q ~ ~ ~ Z ~ ~ '" If i '"' .., ~ . - QUICK REFERENCE CHART If your phone is not performing to your expectations, first before calling Uniden customer service- PROBLEM .. No dial tone please try these simple steps SUGGESTION Checkthat thephone linecordconnectorsat bothends are pushed in until they click. If you havehad a powerfailureor haveunpluggedthe base unit, replacethe handset on the baseunit for two ,'" to five seconds to reset the system.
~ z 0 ~ ~ ~ ~ z ~ ~ ~ GENERAL Australian Specification: The DS70 complies with TSOOl, TSO02, TSO04, AS/NZS 3260 and FCC Part l5(as per ACA Radio Communications Class Licensing Requirements). New Zealand Specification: The DS70 complies with PTC200, RFS 29. Frequency control: PLL Modulation: Direct Sequence Spread Spectrum; DBPSK Operating temperature: 00 to +500 C BASE (UNIT, Frequency: 917.4 to 925.8 MHz (15 channels: Australia) Frequency: 923.4 to 927.
WARRANTY One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited ACN 001 865498 Uniden New Zealand Limited ELEMENT OF WARRANTY: Uniden warrants to the originalretail owner for the duration of this warranty,its DS70 (herein after referredto as the Product), to be free from defectsin materials and craftsmanshipwith only the limitations or exclusions set out below.
CONTROLS&FUNCTIONS 0 ]jJIJJ 23 1. Headset Jack 2. 3. 4. Battery Compartment In Use LED Talk/End button 5. 6. 7. 8. Call Waiting button 3 Way Chat (conference) button Redial/Pause button Handset Aerial 9. Low battery/Out of range indicator 10. Volume Control buttons 11. Numeric Keypad 12. Recall Button 20 22 13. 14. 15. 16. 17. Memory button Charging Contacts Handset retainer Power Indicator LED In Use LED 18. 19. 20. 21. 22. 23.
8 1 3 9 4 5 6 10 11 2 7 12 13 14 15 21 16 17 18 19 20 21
@ 2001 Uniden Australia Pry Limited Uniden New Zealand Limited