Digital Cordless Phone OWNER'S MANUAL

Installing the Accessory Handset

Checking the Package Contents

Make sure your package contains the following items. If any items are

missing or damaged, contact your place of purchase.

Activate the handset

The handset is powered by a rechargeable

battery pack already installed in the handset’s

battery compartment. Before charging the bat-

tery for the st time, push the pin for activation,

located on the bottom of the handset (see label

with instructions). Once activated, remove the

label and pin and then place the handset in the

charger.

Notes:

Use only the Uniden (BT-446)

rechargeable battery pack supplied with

your cordless telephone.

Caution:

Keep magnetic items away from the

handset.

Don’t place the handset where it will be

subjected to direct sunlight for long periods

of time.

•

Cordless Handset

Charging Cradle

AC adaptor, model

No: AAD-7805WP

Input: 240V AC 50Hz

Output: 21V DC 100 mA

•

Rechargeable NiMH Battery

Pack, model No: BT-446

Capacity: 800 mAh, 3.6V

Beltclip

Printed Material

•