Owner's Manual

THE INTEGRATED ANSWERING DEVICE[ 46 ] www.uniden.com
▼ Choosing between the two outgoing messages
Press the greeting key. Then press the greeting key again when the outgoing message
is played. This switches between the prerecorded greeting and the personal greeting.
After finishing playing back the message, a confirmation tone is heard.
Setting the base ringer volume
You have three ringer options. One allows you to turn the ringer off. The other two are
volume levels.
Temporarily mute the base ringer
Press the key to temporarily mute the incoming ring. The ringer will sound with the
next incoming call.
Adjusting the speaker volume level
You can adjust the volume of the base speaker by pressing the select/volume or
key on the base. Press the key for louder or the key for softer while the base
speaker is being used, except in menu mode. The numbers - are displayed on the
base indicating the volume levels. being the softest and being the loudest.
1) Press the ringer key.
You hear the ringer at the current volume level
([ ] High, [ ] Low, [ ] off) (if you set the
base ringer volume to off, “Ringer off” is announced)
and it is displayed on the base.
2) Press the ringer key until the desired ringer option appears.
3) The system displays the new ringer volume.
To delete the personal Greeting, press the delete/ key during the announcement and the system
announces “Greeting has been deleted”.
find hs
answer on/off delete
c arge/i
use
clock/menu
mic
set
select/volume
memo rec greeting ringer
• When you have set the
base ringer to off and
the handset is on the
base, you will still
hear the ringer from
the handset.
• When you press the
select/volume
key at 9 or the
select/volume
key at 0, an error
tone sounds.
DXAI3288-2 2/4/03 1:19 PM Page 46