Owner's Manual
Table Of Contents
- Welcome/Features
- Controls and Functions
- Terms Used in this Manual
- Accessibility
- Installing the Phone
- Register Handsets to the Main Base before Using!
- When to Re-register Handsets
- Basic Setup
- Using Your Phone
- Using the Speed Dial Memory
- Caller ID and CIDCW (Caller ID on Call Waiting)
- The Integrated Answering Device
- Setting Up Your Answering System
- Answering System Setting
- Setting the Time
- Setting a Personal Security Code (PIN)
- Setting the Ring Time
- Selecting the Message Record Time
- Setting the Message Alert Tone
- Selecting the Language
- Setting Your Outgoing Message (Greeting)
- Setting the Main Base Ringer Volume
- Temporarily Mute the Main Base Ringer and Call Screen
- Adjusting the Speaker Volume Level
- Turning the Answering System On/Off
- Using Your Answering System
- Changing the Digital Security Code
- Note on Power Sources
- General Information
- Troubleshooting
- Precautions & Warranty
- I.C. Notice
- Index
- Remote Operation Card
- At Uniden, we'll take care of you!
USING THE SPEED
DIAL MEMORY
USING THE SPEED DIAL MEMORY [ 25 ]www.uniden.com
5) Store Number is displayed. The cursor flashes indicating
that the phone is ready for the number to be entered.
6) Use the keypad to enter the phone number; each number
can be up to 20 digits.
If you need the phone to pause during the dialing sequence,
press the
redial/pause key to insert a two-second delay
between the numbers. You can enter multiple pauses to
increase the delay. Each pause counts as a digit. The
display shows a
P for every pause.
7) Press the memory key. You will hear a confirmation tone,
and the following screen appears.
Memory storage is complete.
After about 2 seconds, the following screen displays all the
speed dial memory entries.
8) Press the
end key to exit memory setup mode. The phone
returns to standby.
Store Number
8007303456
Memory01 Stored
01 Movies
02 JOHN DOE
03 MOM AND DAD
Store Number
When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for
more than 30 seconds, it will beep rapidly, and the phone will return to standby mode.