UP743BH_hyoushi01.
Welcome/Features/Terminology Controls & Functions Setting up the Phone Choose the best location Battery Backup Feature Install the rechargeable battery pack Low battery alert Cleaning the battery charging contacts Connect the base and charge the handset Mounting the Base Unit on a Wall Standard wall plate mounting Expanding Your Phone Backwards/Forwards Compatibility Connect the expansion handset's charger Register the Handset Register the ELX500 expansion handset to main base Changing the Digital Security
Features Thank you for purchasing a Uniden Multi-Handset phone. This phone is compatible with Bluetooth enabled headsets. The USB connection lets you use your personal computer to edit your phonebook, download schedule reminders, and even import contacts from Microsoft Outlook. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit.
Portions of this product were created using LEADTOOLS ©1991-2002, LEAD Technologies, Inc. ALL RIGHTS RESERVED. Terminology •Standby mode: •Talk mode: The handset is not in use. If it is off the cradle, no line has been activated. No dial tone is present. A telephone line has been activated on the handset, enabling a dial tone. Accessibility Uniden provides a customer service hotline for accessibility questions.
Controls & Functions 4 5 3 11 6 7 8 9 10 12 13 14 15 16 17 18 19 www.uniden.com C o n t ro ls & F un ct i o n s [ 4 ] C o n t r o l s & F u n ct io n s 1 2 1. New Message LED 2. Speakerphone Speaker and Ringer 3. Sub LCD 4. Handset Earpiece 5. LCD display 6. Speaker Volume up/down key (P. 52) 7. (phonebook)/ (P. 56 & 21) 8. Talk/flash (P. 42 & 45) 20 9. Back/hold/int'com (P. 21 & 47 & 79) 21 10. */tone (P. 53) 11.Soft menu keys (P. 20) (message)/ (P. 72 & 21) 22 12. 13.Menu/select (P. 21) 14.
27 28 29 30 31 32 46 47 33 34 35 36 37 25 48 38 39 40 41 45 26 42 43 25. Base Charge Contacts 26. Base Speaker 27. Base Antenna 28. Dnd (do not disturb) (P. 74) 29. LCD Display 30. Soft keys (P. 20) 31. Back/hold/int'com (intercom) (P. 21 & 47 & 79) 32. Phonebook/ key (P. 56 & 22) [5] Controls & Functions 44 33. Speaker Volume up (P. 50) 34. Menu/select (P. 21) 35. Cid (Caller ID)/ (P. 63 & 22) 36. Speaker Volume down (P. 50) 37. End/find hs (P. 44 & 53) 38. (speaker)/flash (P. 43 & 45) 39.
Setting up the Phone note For maximum range: Choose the best location When choosing a location for your new phone, here are some important guidelines you should consider: •Do not hold the handset where you would block the signal. Correct Antenna •Metal and reinforced concrete may affect cordless telephone performance. www.uniden.
note The battery backup allows you to make and receive calls during a power failure. You can use any handset or the base, just as you would normally. Install the power backup battery in the base 1) Open the battery case cover by pressing the release button on the bottom of the base as shown. 2) Plug the battery connector (red and black wires) into the jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one way).
Install the rechargeable battery pack note Use only the Uniden (BT-0002) rechargeable battery pack supplied with your cordless telephone. 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Place the battery pack in the battery compartment with the connectors on the battery and on the compartment aligned. 3) Place the battery case cover back on the handset and slide it upwards until it clicks into place.
When the battery pack is very low, the phone is programmed to eliminate functions in order to save power. The battery pack needs to be charged when: - The empty battery icon appears. 570 # - L o w B at te r y appears in the display. If the phone is in standby mode, none of the keys will operate. If you are on a call, complete your conversation as quickly as .QY $CVVGT[ possible, and return the handset to the cradle.
Connect the base and charge the handset note •Use only the supplied AD-0009 AC adapter. Do not use any other AC adapter. •Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard. •Don't place the base in direct sunlight or subject it to high temperatures. The battery may not charge properly. 1) Connect the AC adapter to the DC IN 9V jack. Place the base close to the AC outlet to avoid long extension cords.
Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Snap the wall mount adapter into the notches on the base top. ! DO NOT use an AC outlet controlled by a wall switch. 2) Plug the AC adapter into the DC IN 9V jack. 3) Wrap the AC adapter cord inside the molded wiring channel as shown. 4) Plug the AC adapter into a standard 120V AC wall outlet. 5) Plug the telephone line cord into the TEL LINE jack. Wrap the cord inside the molded wiring channel as shown.
note •Advanced features may not be supported by older handsets. •If you have any trouble with your phone, visit our web site at www.uniden.com or call our Customer Hotline at 1- 800-297-1023 (Mon -Fri 7 am to 7pm, Sat/ Sun 9 am to 5pm, CST). (Phone support is closed on holidays.) www.uniden.com Your phone can support a total of ten handsets. Expansion handsets do not need to be connected to a phone jack.
The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the charger. note •Use only the supplied AD-0005 AC adapter. Do not use any other AC adapter. 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2) Set the charger on a desk or tabletop, and place the handset in the charger with the sub-LCD screen facing forward. 3) Make sure that the charge LED illuminates.
Before the expansion handset is registered, the battery pack MUST be charged for 10 hours. To register an ELX500 handset, simply place it in the main base. While the handset is registering, Ha n ds et R eg is t er i ng will appear in the LCD. When Reg istration complete. is displayed, the handset has been registered to the base. If R e gi s tr at i on fa i le d. appears, please try these steps again.
note The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. To change the digital security code: 1. De-register all the handsets you have (see page 86). 2. Re-register each handset by following the steps on page 14.
Optional Headset Installation note Your phone may be used with an optional headset To use an optional headset, insert the headset plug into the headset jack. Your phone is ready for handsfree conversations. (Headsets may be purchased by calling Uniden's Customer Hotline or visiting the web site on the back cover page.) To use with a Bluetooth headset, see page 37. This phone includes Uniden's Cordless Customization application for your Windows PC.
1) Insert the Cordless Customization CD into your computer's CD-ROM drive. The installation application should start automatically. 2) If the application doesn't start, go to the Start menu and select Run. 3) In the window, type d:\autorun.exe (where d is the letter assigned to your CD-ROM drive), and click OK. 4) Once the software is installed, connect the USB cable to the handset and your PC as shown. 5) Customize your Uniden Cordless Handset.
Using the Interface Example of the standby mode display • Handset Battery icon 570 # Date, Day of the week, and time 0GY %+& Number of new caller ID calls received • Sub-LCD # Date, Day of the week, and time/Battery icon 0GY %+& Number of new caller ID calls received. • Base /'55#)' 0 570 # 0GY %+& Day of the week and time Number of new caller ID calls received Number of message appears if you have a new message.
Display Icons ICON Handset Sub-LCD DESCRIPTION Base - Battery icons indicate the handset battery status. This icon cycles depending on the battery status (empty, low, medium, and full). Ringer off icon indicates that ringer is turned off. - - Bluetooth icon appear when you are using bluetooth features. The icon is blue when the bluetooth device is on. Mute icon appears when you mute the handset or the base. - - Speaker icon appears when the handset speaker phone is used.
Soft Key Function "Soft" keys are keys that change function during the operation of the phone. There are two soft keys on the handset and base. The text right above the soft key indicates that key's current function. For example, when the phone is in standby mode, pressing soft key 2 on the handset make a selection. When the phone is in talk mode, pressing soft key 2 brings up the options menu. Complete information on the features controlled by the soft keys can be found under each feature.
To make menu selections, please follow the instructions below: Press menu/select. Highlight the option you want by pressing up, down, right, or left key on the handset, or up or down key on the base. This will move the cursor; the option currently highlighted appears in reversed out text. Select the highlighted option by pressing the menu/select key. To exit the menu and return to standby, press the end key on the handset or the end/find hs key on the base.
Entering text You can use the number keypad on your phone to enter text by referring to the letters printed on each number key. When you press the number key in a text entry field, the phone displays the first letter printed on the number key. Press the number key twice to display the second letter and three times to display the third. Capital letters are displayed first, then lower case letters, then the number on the key.
Main Menu Options Your phone has various main menu options: On the handset, the options are DirectLink, Room Monitor, Messages, Reminder, Speaker Setup, Display Options, Ringer Options, System Setup and Bluetooth. 5RGCMGT 5GVWR Note: • If you do not press a key within 30 seconds, the phone will time out and exit the menu mode. When setting Date and Time, the time-out period is extended to two minutes. • All of these options can be configured in the Cordless Customization Application.
note Through this section we use handset display images for explanation. System Setup 5[UVGO 5GVWR Handset or Base The following submenu options must be set separately for each handset and the base. 5'.'%6 (System Setup) Handset (Base) LCD Contrast Open to Answer LCD Contrast (For Base) You can change the contrast of your base display to make .%& %QPVTCUV /'55#)' it easier to read. You might want to adjust the contrast whenever you change the display color. Your phone gives 5'.
#P[ -G[ #PUYGT 1P 1HH Handset (Base) 5'.'%6 Banner Display (Handset only) You can change the name your phone displays on the screen. If you have more than one handset, you can use the banner name to identify your handset during handset-to-handset functions like intercom and DirectLink. Go to Banner Di splay and enter the name you want to use. You can use up to 10 characters. Use the DELETE soft key to delete an existing handset name. Press menu/select when you're finished.
(System Setup) Handset (Base) Call Privacy Language Unique ID If you don't want other registered handsets and the base to interrupt you on a call, you can turn on privacy mode. As long as your handset or the base is in privacy mode, other handsets won't be able to join your call or make any calls of their own. To turn on privacy mode, go to Cal l Priva cy and select On. You can turn on privacy mode when the phone is in standby or when you're already on a call. You will hear a confirmation tone.
Global settings apply to registered handsets and the base. If you change something under the global menu, you change it for handsets and the base. Only one handset or the base can change global settings at a time, and you have to make sure the phone is not currently being used. 5[UVGO 5GVWR (System Setup) Global 5'.'%6 Some features may not be supported by older handsets. Date and Time To change the date and time shown in the display, go to Da t e & T i me .
Global Call Waiting To let your phone support these features, go to Ca l l W ai t in g . Select O n , and the phone will display the CallWaitDeluxe screen. Select O n . (You have to turn on Call Waiting before you can turn on Call Waiting Deluxe.) A confirmation tone tells you that your phone is ready to use these features. %CNN 9CKVKPI 1P 1HH 5'.'%6 Area Code Area Code If you can make a call by dialing only 7 digits (instead of 10), you can program your local area code in your phone.
If your phone company uses Pu l se dialing, you'll need to change your phone's dial mode. There's an easy way to tell: try making a call. If your call connects, your phone's setting is fine. If not, go to D ia l M o de and select Pu ls e . A confirmation tone tells you you've changed the dial mode, and you can try making a call again. (System Setup) Global &KCN /QFG 6QPG Dial Mode 2WNUG 5'.'%6 [ 2 9 ] S ys t em Se t up M e n u www.uniden.
(Ringer Options) (Base:Rings/Volumes) 4KPIGT 1RVKQPU This menu lets you customize Ringer or Speaker Volume setting in your phone. You can set these options separately for each handset and the base. 5'.'%6 Ringer Tones Ringer Tone You can set a different ringer for each handset and the base. This phone comes with 10 prerecorded songs and 15 different ringer tones; for the handset you can also record your own ringer tones (see page 32).
You can assign special ringer tones to anyone in your phonebook. When your phone gets a call, it looks up the Caller ID information in your phonebook; if you've assigned a distinctive ringer to that number, the phone uses it so you know who's calling. To turn on distinctive ringing, go to U ni q ue tells you that Unique Ring is active. Ri n g and select 7PKSWG 4KPI (Ringer Options) (Base:Rings/Volumes) /'55#)' 1P 0 On. 1HH 5'.
(Ringer Options) Call Vibrate Rec/Edit Rings You can choose a vibrate pattern (4 patterns (1-4) and Off). To set Vibrate, go to C a ll Vi br a te and then select the pattern. Selecting OFF will turn off the vibrate feature for incoming calls only. A confirmation tone tells you that Vibrate Pattern is active. Customize Your Own Distinctive Ringer Tones (Handset Only) Your phone can store up to 5 different recordings to use as ringer tones (a total of 100 seconds).
S y s tem S etu p M e nu 2) Go to Re c /E d it R i ng s . 4GEQTF 4KPIGT 9CKVKPI VQ 3) Select a location from 1-5, and press the OPTIONS soft key. 4GEQTF 4) Use the up/down key to select R e co r d . To start recording, press the RECORD soft key. The message counter displays 2 0 and then begins to count down. 5) When you are finished recording, press the STOP soft key. The phone will play the recorded ringer. To re-record the ringer, press 4'%14& the ReRec soft key while playing the ringer.
1RVKQPU 2NC[ %JCPIG 6KVNG &GNGVG 5'.'%6 Display Settings (Handset Only) (DisplayOptions) Wall Paper The following submenu options must be set separately for each handset. 5'.'%6 Wallpaper (Handset Only) Your phone has 34 preset wallpaper/images to choose from. You can customize or replace 30 of these images using the software application CDROM supplied with this phone. &KURNC[1RVKQPU 9CNN 2CRGT 0Q 5GNGEVKQP 7PKFGP .QIQ #PCNQI %NQEM &KIKVCN %NQEM %CNGPFCT EJGEMGTHNCI 8+'9 www.uniden.com 5'.
• You can download images using the PC application CD-ROM, and use them for your wallpaper. Color Scheme (Handset Only) You can change the color of your phone's display. There are 5 different colors to choose from: Sky Blue, Haze Gray, Chic Purple, Coral Red, and Lime Green. To change the color of the display, go to Color Sche me and select the color you want. As you scroll through the options, the phone displays the highlighted color for you.
Animation Type delete done page talk batt-low To set your animation type, scroll through Animation Type options, and press the VIEW soft key. Press menu/select to activate the animation type of your choice. end unavailable #PKOCVKQP 6[RG 0Q 5GNGEVKQP &QI %CT (TQI #DUVTCEV 8+'9 Language Language (for the Handset) You can change the language the menu display will use. Choose from English, French, or Spanish.
note Using Bluetooth Headset (Handset Only) The phone also supports Bluetooth v 1.1 compliant headsets. Please visit our web site for more detailed information about Bluetooth compatibility and troubleshooting tips. Before you can use a bluetooth headset, you must pair it with the phone. Once you have paired your headset with the phone, you do not have to pair it again until you want to use it with another phone.
The ELBT585 will begin to search for a bluetooth device. Once detected, the headset's name will appear in the handset's display. Press the STOP soft key to back to show the list of the bluetooth headsets. (KPF &GXKEG (QWPF 5612 When pairing is completed successfully, you will hear a confirmation tone, and Pa i ri ng Su c ce s sf ul ! appears on the handset. If pairing failed, P ai r in g f a il e d Tr y a g ai n appears. 2CKT YKVJ /QVQNQTC *5 2NCPVTQPKEU/ #$ 5'.
Us i n g t h e B l u e t o o t h Fe at u r e Turning Bluetooth ON or OFF The Bluetooth connection still uses power even when you're not currently using a Bluetooth device. To save power, you can turn off the Bluetooth connection when it's not in use. 1) When the phone is in standby mode, press menu/select on the $NWGVQQVJ 1P 1HH handset. *GCFUGV 2) Select the Bluetooth icon. /[ *CPFUGV 3) Use the up/down key to select O n/ O ff , and then press menu/select.
Viewing Property of the Handset To view the handset information, follow the following steps. 1) When the phone is in standby mode, press menu/select on the handset. 2) Select the Bluetooth icon. 3) Use the up/down key to select M y H a nd se t , and then press menu/select. The handset name and serial number are displayed. To go back to the Bluetooth setting display, press back/hold/int'com. If a paired headset will not connect to the handset, you can reconnecting to the headset.
If you want to stop using a paired headset completely, you can deregister it; this will allow you to pair another headset in the future. You can also try deregistering and re-pairing a headset if you can't connect to it. 1) When the phone is in standby mode, press menu/select on the handset. 2) Select the Bluetooth icon. 3) Use the up/down key to select Headset, and then press menu/select. 4) Press the OPTIONS soft key and select De re g is t er .
Using Your Phone note •When you dial the number from the handset in standby mode, hyphens are inserted between numbers. •If the line is already in use, all other registered handsets and the base will display "InUse ." Making Calls From the Handset 1) Remove the handset from the charging cradle. 2) Flip the top panel up. 3) Press talk/flash. 4) Listen for the dial tone. 5) Dial the number. OR 1) Remove the handset from the charging cradle. 2) Flip the top panel up. 3) Dial the number.
1) Remove the handset from the charging cradle. 2) Flip the top panel up. 3) Press (Speaker Phone) on the side of the handset. 4) Listen for the dial tone. 5) Dial the number. note For best performance, use the speaker phone in a quiet room and let the caller finish speaking before you speak. If you or the other party has difficulty hearing, adjust the speaker volume. OR 1) Remove the handset from the charging cradle. 2) Flip the top panel up. 3) Dial the number.
Receiving a call/AutoTalk set to OFF note •If Open to Answer is ON, the phone will automatically answer the call when you flip the top panel up. (see page 24) •If Any Key Answer is set to On, you can also press any number key on the keypad to answer a call. (see page 25) •While using the handset speaker phone or a headset, closing the top panel will not hang up the call. Handset is off the cradle 1) Flip the top panel up. 2) Press talk/flash. From the base Press /flash.
If you move your handset farther from the base unit during a call, you might start to hear more noise than usual. If you go too far from the base, you'll hear a beep and see No Si gn a l Press HELP. Press the HELP soft key on the display. Call Waiting If you hear a call waiting tone while you're on a call, press talk/flash or /flash on the base to switch to the new call. After a short pause, you'll hear the new caller. Press talk/flash or /flash on the base again to go back to the original caller.
Call Waiting Deluxe note To use CWDX feature, you must set Call Waiting and CallWaitDeluxe to On in the system setup menu (see page 28). If you subscribe to Call Waiting Deluxe (CWDX) from your phone company, you have several different options when you get a call waiting call. When you hear the call waiting tone, instead of answering the call, you can press menu/select or the OPTIONS soft key, and then select C allW aitD elu xe.
During a call, press. Press back/hold/int'com, to put the call on hold. Press talk/flash or /flash on the base to go back to the call. 570 # *QNF note •If you leave a call on hold for more than 5 minutes, warning tone sounds and Hold Reminder! Answer held line appears, /'55#)' Conferencing If you have more than one handset, up to four people can participate in a conference call.
From the base 1) Press on the base to join the conference call. 2) To hang up, press end/find hs. The handset(s) will still be connected to the call. From the handset 1) Press talk/flash or on the handset to join the call. 2) To hangup, return the handset to the cradle or press end on the handset. The base or other handset will still be connected to the call. Us i n g Y ou r Ph o ne [ 4 8 ] U s in g Yo u r P h o n e www.uniden.
You can quickly redial the last 20 phone numbers for each handset and 10 numbers for the base. With the phone in standby mode, press redial/ on the handset (or press menu/select, and then select R ed i al on the base). This brings up the redial list. Use the up/ down key to scroll through the numbers, and select the number you want to dial. Press talk/flash (or ) or /flash on the base to dial the selected number. You can also display the redial list for redial number with the phone in talk mode.
Rings/Volumes Ringer Volume Speaker Volume Adjusting Base Ringer and Speaker Volumes Adjusting the base ringer volume You can choose from three ringer settings on the base: off, low, and high. When the phone is in standby mode, go to R i ng s /V ol u me s menu, and then select Ri n ge r V ol u me . Use the up, down, right, or left key to select the ringer volume, and menu/select. You will hear a confirmation tone. Adjusting the base speaker volume You can adjust the volume of the speaker during a call.
Us i n g You r P h o ne Using the Handset Volume Setting Menu Ringer: Adjust the handset ringer volume You can choose from three different ringer volume settings on your handset: off, low, and high. When the phone is in standby mode, go to the Ringer Options menu, and then select Ringer Volume. Use the up/down key to select the ringer volume, and press the menu/select. You will hear a confirmation tone. Ear speaker: You can choose from six volume levels for the earpiece speaker.
(Speaker Setup) Speaker Volume Speaker: Adjust the handset speaker volume You can choose from six volume levels for the handset speakerphone. To adjust the speaker volume, go to Speaker Setup menu, and select S pe a ke r V ol u me select the volume level you want to use. You can also adjust the handset speaker volume during a call by pressing the or key on the side of the handset, and then up (to make it louder) or down (to make it softer).
Us i n g You r P h o ne Tone Dialing Switch Over If your telephone company uses pulse dialing, you can switch over to tone dialing after the call connects. This feature is useful when you need tone dialing to use any automated menu systems, such as telephone bank tellers, telephone prescription refills, customer support menus, etc. If your phone is set to pulse dialing mode, make your call normally. Once your call connects, press the */tone key.
Reminder (Handset only) ! The Date & Time must be set to use the Calendar features. To set the Date & Time, scroll to Global in the System Setup options (see page 27). Your phone has a built-in calendar that you can use to schedule reminders and appointments (all the way through December 31, 2099). You can set alarms for up to 30 different events. A pop-up screen appears and reminder tone sounds when the scheduled time & date comes. To show detailed info on the reminder, press the VIEW soft key.
Us i n g You r P h o ne 1) Press menu/select to select a date. 2) Press the STORE soft key to add a reminder. 3) Press menu/select to set the date and time. 4) Use the number keypad or */tone to select the hours and minutes. Press menu/select when you're finished. 5) To change the title, select and press menu/select. Use the number keypad, left, right key, and the DELETE soft key. Press menu/select when you're finished.
Your phone lets you store up to 100 entries in each handset and base. You can store up to 4 phone numbers for each name in your phonebook (for a total of 400 numbers), and you can assign names to groups for easy searching. You can store a distinctive ringer tone and picture display, to your each or group. You can enter your phonebook by pressing the left key on the handset or base. Creating and Editing Phonebook Entries Press the left key and press the STORE soft key for the first entry.
, note 'FKV 2JQPGDQQM 0Q 0COG Select , and use the keypad to enter the name for this entry. You can enter up to 16 characters. If you don't want to enter a name, your phone will store this entry as No Name. Press menu/select when you're finished, and your phone will go back to the current phonebook entry. 0Q 0WODGT 0Q 0WODGT 0Q 0WODGT 0Q 0WODGT 0Q 5GNGEVKQP 5'.'%6 Step 2: Number , Select , and enter a phone number for this entry.
Select to attach a special screen display to this entry. Select the display you want the phone to use when this person calls, or select N o S el e ct i on to have the phone use its regular display. You can press the VIEW soft key to see the display choices: Press menu/select when you're finished, and your phone will go back to the current phonebook entry. Step 5: Phonebook Group , Select , to place this entry into a phonebook group.
You can store Caller ID or redial numbers in your phonebook so you can use them later. Go to the Caller ID list or redial list and select the number you want to store. (If the Caller ID information didn't include the number, then you can't store it.) 1) With the phone in standby mode, go to the Caller ID list or redial list and select the number you want to store. 2) Press the OPTIONS soft key, and then select Ad d t o P ho n eb o ok .
With the OPTIONS soft key, you can delete phonebook entries, copy entries to another handset or the base, check how many empty phonebook and speed dial entries you have available, sort your phonebook by groups, and name phonebook groups. Deleting phonebook entries Go to the phonebook and select the entry you want to delete. Press the OPTIONS soft key and select De l et e Se l ec t io n . Your phone will ask you to confirm select Y es .
To copy all the phonebook entries, go to the phonebook and press the OPTIONS soft key without selecting an entry. Select then C op y A l l . Select the handset or base you want to copy to the entry to. U s i n g t h e P ho n e b o o k To copy a single entry, go to the Phonebook and select the entry you want to copy. Press the OPTIONS soft key and then C o py S e le c ti o n . Select the handset or base you want to copy to the entry to. 6Q YJKEJ WPKV! *CPFUGV *CPFUGV *CPFUGV $CUG 5'.
Your phone comes with 10 groups to organize your phonebook. You can name groups things like "Family" or "Friends" or "Softball team" to let you find entries in your phonebook more quickly. 1RVKQPU %QR[ 5GNGEVKQP 2JQPG$M %CRCEKV[ &GNGVG #NN %QR[ #NN 5QTV Follow the steps below to name a group: 'FKV )TQWR 0COG 1) Go to the Phonebook and select the OPTIONS soft key. 5'.'%6 2) Scroll down to Ed i t G ro u p N am e and press menu/select.
C a ll er ID Fe a tur e s Caller ID Features If you subscribe to Caller ID from your phone company, your phone will show you the caller's phone number and name (if available) whenever a call comes in: %CNNGT +& If you subscribe to both Call Waiting and Caller ID the phone also show you the name and the number of call waiting calls (that is, calls that come in while you're on the line.
note If you want to see how many Caller ID numbers are stored in your phone, Press the right key, and then the OPTIONS soft key. Select C ID Ca p ac it y. 1RVKQPU &GNGVG 5GNGEVKQP &GNGVG #NN #FF VQ 2JQPGDQQM When you delete a Caller ID number, you delete it permanently. %+& %CRCEKV[ Calling someone from the Caller ID list Go to the Caller ID list and select the number you want to call. If you need to add a "1" to the number for a long distance call, 5'.'%6 press */tone.
Answering Machine Answering Machine The phone has a built-in answering machine that answers and records incoming calls. You can also use your answering machine to record a conversation, leave a voice memo message, or announce a special outgoing message to callers when you're away from your phone.
Setting Up the Answering Machine To access the answering machine settings, go to the System Setup Menu and select Answer Machine. 5[UVGO 5GVWR 5'.'%6 (System Setup) 1RVKQPU /'55#)' 4GEQTF /GOQ Answer Machine Security Code Security Code If you want to call in and get your messages when you're away from, you'll have to set a security code. Go to A n sw er Ma c hi n e and select S e cu ri t y C od e . use the keypad to enter a two-digit number (01-99), and press menu/select when you're done.
Record Time You can set how long a caller has to leave a message before the answering machine hangs up. Go to A ns w er M a ch i ne and select R e co r d T im e . Then select the maximum length of messages; choose from 1 minute or 4 minutes. The Announce Only feature makes the answering machine answer call but it won't let callers leave a message. When the Announce Only feature is on, and will appear on the base.
(System Setup) Answering Machine Message Alert Language Message Alert If you want the answering machine to beep every 15 seconds whenever you have unheard messages, turn on the message alert tone. Go to An s we r M ac h in e and select M e ss ag e A l er t . Select On . A confirmation tone tells you the setting has been saved. The message alert turns off automatically after you listen to all your new messages. You can also turn off the message alert by pressing any key on the base.
(System Setup) Your answering machine comes with a prerecorded greeting: "Hello. No one is available to take your call. Please leave a message after the tone." You can use this greeting, or you can record your own. Answering Machine Your own greeting must be more than 2 seconds and less than 30 seconds. Recording a greeting From the base To record your own greeting, make sure the phone is in standby mode. Go to Re c or d G reeting , and then press menu/select. Press the START soft key.
If you want to delete your greeting, press the DELETE soft key while the greeting is playing (You can't delete the prerecorded greeting.) From the handset Press . Press /6. The greeting currently being used will be played. If you want to use the other greeting, press the key again. If you want to delete your greeting, press the /4 soft key while the greeting is playing (You can't delete the prerecorded greeting.
Answering Machine Reviewing Messages When you have a new message, the new message LED on the handset blinks and appears on the handset. On the base, appears. The LED stops blinking when you've listened to all your new messages. The answering machine plays your new messages first. After you play all your new messages, you can then play your old messages. [ 7 1 ] A n s we r in g M a c hi ne www.uniden.
You can review your messages from the base or from the handset: note •You can't delete unheard messages. If you try to delete messages before listening to them, the answering machine will beep and say "Please playback all messages." •If you press |<< during the first two seconds (or press /1 during the first 4 seconds) of a message, the answering machine goes back to the previous message. From the base Playing your messages Press , The phone announces tells you how many new and old messages you have.
You can record a phone conversation with your handset or base. The conversation has to last more than two seconds and less than ten minutes. During a conversation, press menu/select. Use the up/down key to select C al l R ec o rd . The handset or the base sounds a confirmation tone that can be heard by both parties and displays R ec o rd in g a c al l . When you want to stop recording, press menu/select and select C a ll Re co r d again.
Do Not Disturb (DND) The do not disturb feature (DND) allows you to mute the ringer of the base and any registered handsets at the same time. The phone must be in standby mode. Press and hold dnd on the base. You will hear a confirmation tone, and the dnd LED illuminates. To cancel the DND feature, press dnd again. You can also mute the ringer tone while the phone is ringing by pressing dnd on the base. Activating the DND while the answering system is off will turn the answering system on automatically.
You can check, play, or delete messages when you are away from home. You can also record your own greeting message. To access your answering machine remotely, you need a touch tone telephone and a two-digit security code (see Setting a Security Code on page 66). 1) Call your telephone number and wait for the system to answer. If Toll Saver is enabled, answering machine will answer in 2 rings if you have new messages and 4 rings if you don't.
Command Function 0 then 1 Repeat a Message* 0 then 2 Play incoming Messages 0 then 3 Skip a Message Command Function 0 then 6 answering machine On 0 then 7 Memo Record/Stop** Greeting Message Record/ 0 then 8 Stop** 0 then 4 Delete a Message 0 then 9 answering machine Off 0 then 5 Stop Operation 1 then 0 Help * For the Repeat a Message function, press 0 then 1 within about 4 seconds to repeat the previous message, or press 0 then 1 after about 4 seconds to repeat the current message.
note The features in this section require a minimum of two handsets to operate. To add additional handsets to your system, see "Expanding Your Phone" on page 12. Using DirectLink Mode •If the party is out of range, No Signal appears in the display, and the operation will be canceled. In DirectLink Mode, a pair of handsets can function as two-way radios. DirectLink Mode does not interfere with the main base's ability to make or receive telephone calls.
M u l t i - H a n d s e t Fe a t u r es Room/Baby Monitor note •This feature only works when the handset is within the range of the base. •If the party is out of range, Unavailable appears in the display, and the operation will be canceled. This feature allows you to monitor sounds in another room. Place a handset or the base in the room you wish to monitor; it will function as a microphone. A second handset or the base can be used as a remote speaker, allowing you to monitor sounds in the room.
M u l t i - H a n d s e t Fe a t u r es Intercom You can use the intercom to talk to another handset or base without using the phone line. While the phone is in standby mode, press back/hold/int'com. Select the handset or base you want to page. If you select Al l , all other handsets and base will be paged. If the handset or base you're trying to page is busy, the phone displays S y st e m b us y P le a se tr y l at e r.
You can transfer a call from one handset or the base to another. During a call, press back/hold/int'com; this will put the call on hold. Select the handset or base you want to page. If you select A ll , all other handsets and base will be paged. To cancel the page and go back to the caller, press talk /flash on the handset or /flash on the base. Answering a transfer page When the handset receives a transfer page, it sounds a tone and shows the ID of the handset that is paging.
note Power Failure Your phone has a backup battery in the base that provides power backup in the event of a power failure. You will be able to make or receive calls with the telephone. Battery replacement and handling When the operating time becomes short, even after the battery is recharged, please replace the battery. With normal usage, your battery should last about one year.
General Information The phone complies with FCC Parts 15 and 68. Operating temperature: 0 °C to +50 °C (+32 °F to +122 °F) AC Adapter Information AC Adapter part number: AD-0009 Input Voltage: 120V AC 60Hz Output Voltage: 9V DC 600mA Battery part number: BT-0002 (Handset) Capacity: 980mAh, 3.7V BT-446 (Base) 800mAh, 3.6V Specifications, features, and availability of optional accessories are all subject to change without prior notice. www.uniden.
Troubleshooting If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please call our Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holidays.) Symptom Suggestion • Make sure the AC adapter is plugged into the base or the charger (if you have more than one handset) The charge LED won't and wall outlet.
Symptom Suggestion • The call was placed through a switchboard. The Caller ID does not display. • Call your local telephone company to verify your Caller ID service is current. There may be a problem with your Caller ID service. You cannot register the handset at the base. • Charge the battery pack in the handset for 10 hours. • Change the Digital Security Code (see page 15). The handset doesn't communicate with other handsets. • Change the Digital Security Code (see page 15).
Symptom Suggestion Cannot access remote call-in features from another touchtone phone. • Make sure you are using the correct PIN number. • Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds. If it cannot, you may have to use another phone to access your phone. Time stamp cannot be heard. • Make sure you have set the time (see "Setting Day and Time" on page 27).
System Reset De-register the Handset 1) Press and hold end and # for more than 5 seconds. Select De r eg is t er 2) The phone will ask you to confirm the deregistration. Select Y es . HS . 5[UVGO 4GUGV >GIKUVGT *5 4GRNCEKPI $CUG When the base information is deleted, the handset displays M U ST pl ac e ha nd se t in ba s e t o r eg i st er ! M o de ls ma y va ry , re fe r t o Ow ne rs M an ua l f o r h e lp . Re-register the handset to the base (see page 13). 5'.
Liquid Damage Moisture and liquid can damage your cordless phone. Follow the steps below if your phone gets wet: Case If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected. If moisture or liquid has entered the plastic-housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base). [87] Liquid Damage Action Wipe off the liquid, and use as normal.
Precautions! Before you read anything else, please observe the following: Warning! Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Lithium Ion and Nickel-MetalHydride Battery Warning • This equipment contains rechargeable Lithium Ion and Nickel-MetalHydride battery.
Finally, it should be noted that some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. Cordless Telephone Privacy Cordless telephones are radio devices.
I.C. Notice TERMINAL EQUIPMENT NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.
Index A Animations. . . . . . . . . . . . . . . . . 36 Answering Machine Answering Mode. . . . . . . . . . . . 70 Call screen . . . . . . . . . . . . . . . 68 Message alert . . . . . . . . . . . . . 68 Security code . . . . . . . . . . . . . 66 Setting up menu . . . . . . . . . . . 66 Anykey Answer . . . . . . . . . . . . . . 25 Area Code . . . . . . . . . . . . . . . . . 28 Audio Tone . . . . . . . . . . . . . . . . . 52 B Backup battery . . . . . . . . . . . . . . . 7 Installation. . . . . . . . . . . . .
R Receiving a call . . . . . . . . . . . . . Record ringer . . . . . . . . . . . . . . . Record Time . . . . . . . . . . . . . . . . Recording conversation . . . . . . . . Redialing a call . . . . . . . . . . . . . . Register the handset . . . . . . . . . . Reminder . . . . . . . . . . . . . . . . . . Remote operation . . . . . . . . . . . . Reviewing message . . . . . . . . . . . Ring time. . . . . . . . . . . . . . . . . . Ringer Tone Changing . . . . . . . . . . . . . . . . Deleting . . . . . . . . . . .
Memo [93] www.uniden.
Memo www.uniden.
Memo [95] www.uniden.
Remote Operation Card CUT CUT REMOTE OPERATION CARD REMOTE OPERATION CARD Remote access away from home Turn on the answering system remotely Remote access away from home Turn on the answering system remotely 1. Call your phone number from a touch-tone phone. 2. During the outgoing message, press 0 and enter your PIN code. The answering system announces the number of messages stored in memory and the voice prompts. 3. To quit, hang up the phone. 1.
CUT Task Repeat a Message Playing incoming Messages Skipping a Message Deleting a Message Stop Operation Answering System On Memo Record/Stop Greeting Message Record/Stop Answer System Off Help Guidance CUT Key CUT Task Repeat a Message Playing incoming Messages Skipping a Message Deleting a Message Stop Operation Answering System On Memo Record/Stop Greeting Message Record/Stop Answer System Off Help Guidance [97] Remote Operation Card Task Repeat a Message Playing incoming Messages Skipping a Messa
At Uniden, we'll take care of you! Thank you for purchasing a Uniden product. If you have any questions or problems, please do not return this product to the place of purchase. Having Trouble? Our customer care specialists are here to help you! Visit our website at www.uniden.com or call our customer hotline at 1-800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to 5 p.m. CST. (Phone support is closed on holidays.
R IE S, M @ E CO SO IN . S E NL EN D CC A O O NI .U G W W W FO R R E G I S T E R O N L I N E T O D AY ! T H A N K Y O U F O R B U Y I N G A U N I D E N P R O D U C T. ©2005 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China.
