Owner's Manual

System Setup Menu
[33] System Setup Menu www.uniden.com
Call Vibrate (Handset Only)
You can choose one of four different vibrate patterns. To set Call Vibrate, go to Call
Vibrate
and select Tel Type (LAND or MOBILE), and then select the pattern.
Selecting OFF will turn off the vibrate feature for incoming calls only. A
confirmation tone tells you that Vibrate Pattern is active.
Customize Your Own Distinctive Ringer Tones (Handset Only)
Your phone can store up to 5 different
recordings to use as ringer tones (a total of
100 seconds). Each recording must be less
than 20 seconds long.
Storing Ringer Tones
1) Connect the audio recording cable to the handset and sound source (e.g.stereo
or CD player). Insert one end of the audio recording cable into the handset's
headset jack and the other end into the sound source.
You can also simply use the handset's microphone by holding the handset close
to the sound source.
To the
sound source
To the
headset jack
(Ringer Options)
Call Vibrate
Rec/Edit
Rings