Specifications
Table Of Contents
- CONTENTS
- Illustration (Controls and Keys)
- Important Safety Instructions 2
- Introduction 4
- Included with the EX 905/925 5
- Important Electrical Considerations 6
- Installation 8
- Setting Up Your Phone 17
- Using Your Phone 25
- Programming Your Phone 26
- Troubleshooting 31
- Specifications 32
- Cover
- Precautions
- Illustration (Controls and Keys)
- One Year Limited Warranty
- Back Cover
Automatic Digital Code Security
To avoid unauthorized calls on your phone, a Digital Code was added to
all EX 905/925 phones. This Digital Code is shared only between the
Handset and Base Unit. The Code is set automatically when you first
use the phone.
To change the Digital Code, be sure the Handset is on the Base, then:
1. Remove the Handset from the Base Unit.
2. Press
page/find
on the Base Unit.
3. While the Handset is still beeping,
place it back on the Base Unit.
4. When the beeping stops, briefly
remove the Handset again, and
then return it to the Base Unit.
The
status
LED will blink to
indicate that the Digital Security
Code is set to one of the more
than 65,000 codes.
22 EX 905/925