EXAI378 2/8/2 6:57 PM Page i
EXAI378 2/8/2 6:57 PM Page ii www.uniden.
EXAI378 2/8/2 6:57 PM Page 1 Contents Welcome/Features Quick Reference Guide Controls and Functions 2 4 5 Getting Started Read this First Checking the Package Contents Setting up the Phone Mounting the Base Unit on a Wall Terminology Setting Menu Options 7 8 9 13 14 15 Basics Making and Receiving Calls Adjusting the Handset Ringer and Earpiece Volume Redial Tone Dialing Switch-over Traveling Out-of-Range Selecting a Different Channel Page Flash and Call Waiting RocketDial Storing and Editing the Roc
EXAI378 2/8/2 6:57 PM Page 2 Welcome Congratulations on your purchase of the Uniden EXAI378 series cordless telephone and answering system. This phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purpose. The color of your cordless phone may vary.
EXAI378 2/8/2 6:57 PM Page 3 The EXAI378 series features include AutoTalk TM and AutoStandby TM. AutoTalk allows you to answer a call by just removing the handset from the base so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the base. The UltraClear Plus TM true compander circuitry virtually eliminates background noise.
EXAI378 2/8/2 6:57 PM Page 4 Step 1 Charging the Battery TO INSTALL THE HANDSET BATTERY 1 QUICK REFERENCE GUIDE 2 3 Remove the cover. Connect the battery pack connector with the correct polarity.
EXAI378 2/8/2 6:57 PM Page 5 Controls and Functions 1 5 2 6 3 4 7 8 9 10 11 13 14 15 16 17 18 19 12 20 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.
EXAI378 2/8/2 6:57 PM Page 6 21 22 30 23 24 25 26 31 32 33 34 35 36 27 28 37 29 39 [6] 38 CONTROLS AND FUNCTIONS 40 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40.
EXAI378 2/8/2 6:57 PM Page 7 G E T T I N G S TA R T E D Read this First This cordless telephone must be set up before use. Follow these steps: Step 1 (page 8) Unpack the telephone and accessories. Step 2 (page 9) Next, choose the best location to set up the base unit. Step 3 (page 10 to 13) Then, insert the battery pack into the handset. Connect the base unit. You must charge the battery pack for 15-20 hours before plugging into telephone line and using the phone.
EXAI378 2/8/2 6:57 PM Page 8 Checking the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. • • • • • • • • Base unit Handset AC adapter Rechargeable battery Telephone cord Beltclip This Owner’s Manual Other Printed Material Uniden Parts Department at (800) 554-3988 Hours: M-F 7:00 a.m. to 5:00 p.m. CST. We can also be reached on the web at www.uniden.
EXAI378 2/8/2 6:57 PM Page 9 G E T T I N G S TA R T E D Setting up the Phone Do the following steps: A. Choose the best location B. Install the battery pack C. Connect the base unit A. Choose the best location Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS.
EXAI378 2/8/2 6:57 PM Page 10 B. Install the battery pack Charge the battery pack for at least 15-20 hours before plugging the telephone jack and start using your phone. • Use only the Uniden battery (BT-905) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department (see page 8). • Recharge your phone on a regular basis by returning the handset to the base after each phone call.
EXAI378 2/8/2 6:57 PM Page 11 G E T T I N G S TA R T E D Battery use time (per charge) From fully charged (15-20 hours charge time) • Seven hours continuous use. • Fourteen days when the handset is in the standby mode. Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, “ Low Battery” appears on the LCD and none of the keys will operate.
EXAI378 2/8/2 6:57 PM Page 12 C. Connect the base unit 1) Connect the AC adapter to the DC IN 9V jack and a standard 120V AC wall outlet. Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard. 2) Set the base on a desk or tabletop, and place the handset on the base unit as shown. (For wall mounting, see "Mounting the Base Unit on a Wall", on page 13.) 3) Raise the antenna to a vertical position.
EXAI378 2/8/2 6:57 PM Page 13 G E T T I N G S TA R T E D 5) Connect the telephone line cord to the TEL LINE jack and a telephone outlet once the handset is fully charged. If your telephone outlet isn't modular, contact your telephone company for assistance. Modular Mounting the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Plug the the AC adapter to the DC IN 9V jack. 2) Wrap the AC adapter cord inside the molded wiring channel as shown.
EXAI378 2/8/2 6:57 PM Page 14 Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the base and handset.
EXAI378 2/8/2 6:57 PM Page 15 G E T T I N G S TA R T E D Setting Menu Options There are five setup options available. They are Caller ID options [AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code], Dial Mode and Language. AutoTalk allows you to answer the phone without pressing the talk/flash button. If the phone rings when AutoTalk is on, simply remove the handset from the base and the phone automatically answers the call.
EXAI378 2/8/2 6:57 PM Page 16 To enter your Area Code If your calling area requires 10-digit dialing, do not program this option. If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number.
EXAI378 2/8/2 6:57 PM Page 17 Most phone systems use tone dialing which sends DTMF tones through the phone lines. However, some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the mode as follows: 1) When the phone is in the standby mode, press and hold cid/menu. The following screen appears. 2) Press 4 or press • If you are not sure of your dialing system, make a trial call.
EXAI378 2/8/2 6:57 PM Page 18 Making and Receiving Calls Handset On Base To answer a call Refer to page 15 "Setting menu options" to turn on the AutoTalk feature if desired. To make a call Pick up the handset (AutoTalk), or pick up the handset and press talk/flash. 1)Pick up the handset. 2) Press talk/flash. 3) Listen for the dial tone. 4) Dial the number. OR 1)Pick up the handset. 2) Dial the number, then press talk/flash. To hang up OR 1) Pick up the handset. 2) Press redial/p,then press talk/flash.
EXAI378 2/8/2 6:57 PM Page 19 Adjusting the Handset Ringer and Earpiece Volume Handset ringer tone and volume Press or in standby mode to select one of five ringer tones and volume combinations. Earpiece volume Pressing or during a call will change the earpiece volume of the handset. This setting will remain in effect after the telephone call has ended. Ring Type A High Ring Type A Low Ring Type B High Ring Type B Low Ringer Off in Maximum mode or BASICS When you press tone sounds.
EXAI378 2/8/2 6:57 PM Page 20 Redial The redial/p key redials the last number dialed. The redialed number can be up to 32 digits long. Tone Dialing Switch-over • The tone feature only applies when the dial mode is set to pulse. • This special number can be stored in a memory location. This is referred to as Chain Dialing (See page 27.) Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing).
EXAI378 2/8/2 6:57 PM Page 21 Selecting a Different Channel If you encounter interference while using your phone, you can manually change the phone´s channel for clear operation. This function works only when the phone is in use. Press delete/ch. “ Scanning ” appears on the display, indicating the phone is changing to another channel. For more information on interference, refer to "Precautions" on page 59.
EXAI378 2/8/2 6:57 PM Page 22 Storing Phone Numbers and Names Memory Dialing allows you to dial a number using just a few key presses. Your EXAI378 series stores up to 10 names/numbers in the handset. In memory dialing operation, you must press a key within 30 seconds. Otherwise, an error tone will sound and the phone will return to standby. If you return the handset to the base, the phone will return to standby also. 1)Press and hold mem until “ Memory Store” is displayed.
EXAI378 2/8/2 6:57 PM Page 23 5) Press select. “ Store Number” is displayed. The cursor flashes indicating that the display is ready for the number to be entered. 6) Use the number keys to enter the phone number. The phone number cannot exceed 20 digits. • Use redial/p to enter a pause in the dialing sequence. The display shows a “ P”. Each pause counts as one digit and represents a two second delay of time between the digits as they are sent. • Use delete/ch to delete digits as needed. 7) Press select.
EXAI378 2/8/2 6:57 PM Page 24 Steps for Entering Names and Special Characters Refer to the letters on the number keys to select the desired characters. With each press of a numeric key, the displayed character appears in the following order: Upper case letters first, lower case letters next, and finally the number corresponding to the key.
EXAI378 2/8/2 6:57 PM Page 25 T H E I N T E G R AT E D ANSWERING DEVICE For example, to enter Uniden; 1 )Pick up the handset. Press and hold mem. 2 )Enter a number or press , to select a memory location number. 3 )Press select. 4 )Press 8 twice. 5 )Press 6 five times. 6 )Press 4 six times. 7 )Press 3 four times, then press #/ to move the cursor to the right. If the next character uses the same number key, you must press # / to move the cursor over.
EXAI378 2/8/2 6:57 PM Page 26 Making Calls with Memory Dialing Memory dialing from Standby Mode • If you press select before talk/flash, you can confirm the name and the number stored in the selected memory location. • To exit the memory function without dialing, press end. The handset returns to standby. • Whenever you are using a memory menu screen, you must press a key within 30 seconds or the phone will return to standby. 1) Press mem. The handset displays your programmed memory locations.
EXAI378 2/8/2 6:57 PM Page 27 1) Press talk/flash. “ Talk” and the volume setting appears. Talk 2) Press mem. 3) Enter a number (0 - 9) to select the memory location of the desired phone number. The selected phone number is displayed. Then the number is dialed. Talk Volume High Talk 0:00 Talk 0:35 0123456789012 If you select a memory location that does not have a stored number, an error tone sounds and the phone will not dial.
EXAI378 2/8/2 6:57 PM Page 28 Editing a Stored Name and/or Phone Number 1) Press and hold mem until “ Memory Store” is displayed. 2) Press or , or enter a number (0 - 9) to select the memory location you would like to edit. 3) Press select. The following screen appears with the memory location number that you have selected in the display. 4) Press or to select “ Edit Memory”, then press select. The following screen appears. The cursor flashes indicating that the display is ready for the name to be edited.
EXAI378 2/8/2 6:57 PM Page 29 T H E I N T E G R AT E D ANSWERING DEVICE 8)Press select. You hear a confirmation tone and the following display appears. The memory storage is complete. For example, if you store a name and number into memory location number 1, the display shows “ Memory 1 Stored”. After about 2 seconds, “ Memory Store” is displayed. Memory 1 Stored Memory Store 1 UNIDEN CORP 2 JOHN DOE 9)Press end to return to standby mode.
EXAI378 2/8/2 6:57 PM Page 30 Erasing a Stored Name and Phone Number 1) Press and hold mem until “ Memory Store” is displayed. 2) Press or , or enter a number (0 - 9) to select the memory location you would like to erase. 3) Press select. The following screen appears with the memory location number that you have selected in the display. 4) Press to move the pointer down to “ Delete Memory”. 5) Press select. The following confirmation screen appears. 6) Press [ 30 ] to move the pointer to “ Yes”.
EXAI378 2/8/2 6:57 PM Page 31 You can store your most frequently dialed number in the RocketDial location. The RocketDial allows you to dial a number with one key press. (There is no need to press talk/flash. The phone will automatically dial the number stored.) • Memory location for the RocketDial is independent from the memory location for Memory dialing. Storing and Editing the RocketDial 1) When the phone is in the standby mode, press and hold RocketDial. Following display appears.
EXAI378 2/8/2 6:57 PM Page 32 Deleting the RocketDial 1) When the phone is in the standby mode, press and hold RocketDial. Following display appears. 2) Press or to select “ Delete Number”. 3) Press select. Following display appears. 4) Press to move the pointer to “ Yes”. 5) Press select or delete/ch. You hear a confirmation tone and the following display appears. The handset returns to standby mode.
EXAI378 2/8/2 6:57 PM Page 33 Caller ID You must subscribe to Caller ID service to use this feature. When the telephone rings, the Caller ID feature allows you to view the caller’s name and phone number on the display before you answer the phone. The handset displays the phone number of the incoming call, the name, and time. Additionally, you can dial the displayed number and store the information for memory dialing. Make sure you have turned on the Caller ID/Call Waiting feature. (See page 15.
EXAI378 2/8/2 6:57 PM Page 34 When an unknown name is received When an unknown number is received 800-297-1023 • In Caller ID operation, if no key is pressed for more than 30 seconds, an error tone sounds and the telephone returns to the standby mode. • If a call comes in via a telephone system that does not offer Caller ID service, no information is stored. • Each message can be up to 15 characters for the phone number and the name.
EXAI378 2/8/2 6:57 PM Page 35 Deleting Information from the Caller ID List The EXAI378 series stores up to 30 messages. If the phone receives the 31st message, the oldest one in the list is automatically deleted. Caller ID data can also be deleted manually. Deleting a Caller ID message 5/17 12:30PM 03 UNIDEN CORP 800-297-1023 2) Press delete/ch. 3) Press or to select “ Yes” or “ No”. Delete Message? Yes No 4) Press select or delete/ch.
EXAI378 2/8/2 6:57 PM Page 36 3)Press or to select “ Yes” or “ No”. 4)Press select or delete/ch. Delete All? Yes No When the pointer is at “ Yes”: You hear a confirmation tone and all stored Caller ID messages are deleted. When the pointer is at “ No”: The display returns to the summary screen. Total:00 New :01 Total:02 Using the Caller ID List Calling a party from the Caller ID list You can place a call from the Caller ID list. The EXAI378 series stores up to 30 messages.
EXAI378 2/8/2 6:57 PM Page 37 Storing Caller ID messages in Memory dialing Messages shown in the Caller ID list can be stored in memory dialing. Using the incoming call information (i.e., Caller ID list), the phone number of the party on the Caller ID list can be stored in memory. 5/17 12:30PM 03 UNIDEN CORP 800-297-1023 2)Press mem. Select Location 1 2 JOHN DOE You can not store a Caller ID message if no phone number appears in the message. C A L L E R I D F E AT U R E S 1)Press cid/menu.
EXAI378 2/8/2 6:57 PM Page 38 The Integrated Answering Device The EXAI378 series has a built-in answering system that answers and records incoming calls. You can also use your answering system to record a conversation, leave a voice memo message, or to announce a special outgoing message to callers when you're away from your phone.
EXAI378 2/8/2 6:57 PM Page 39 Turning the Answering System On/Off status 1)To turn the answering system on, press answer on/off. The current greeting message will be played and you will hear a confirmation tone. The message counter displays the number of messages stored in memory. If the display flashes, then there are new messages waiting for you. 2)To turn the answering system off, press answer on/off again. After the announcement “Answer off” the message counter display will no longer be illuminated.
EXAI378 2/8/2 6:57 PM Page 40 Setting the Time The clock on the EXAI378 series answering system starts when power is supplied to the base. Follow these steps to set the clock to the correct time. status • Normally the idle time for the menu mode is 30 seconds before the system returns to standby. However for setting the time, the idle time is extended to two minutes. • Press and hold skip/ff or repeat/rew to quickly scroll through the numbers on the display. [ 40 ] 1) Press menu.
EXAI378 2/8/2 6:57 PM Page 41 7) Press set/ringer to select the minute. 8) Press skip/ff or repeat/rew until you hear the correct AM or PM setting. The message counter displays [ ] or [ ]. 9) Press set/ringer to select the AM/PM setting. You hear a confirmation tone, then the announcement “Time” and the time and day are announced for your review. The base LED displays the number that corresponds with the day of the week.
EXAI378 2/8/2 6:57 PM Page 42 Setting the ring time The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after two, four, or six rings. Setting (Toll Saver), the answering system picks up after two rings if you have new messages, and after four rings if there are none.
EXAI378 2/8/2 6:57 PM Page 43 Selecting the message record time You have three record time options. The options "1 minute" or "4 minutes" set the duration for recording the incoming messages. "Announce only" answers the call with the preset greeting or your personal greeting but prevents the caller from leaving a message. status 1)Press menu four times. You hear “Record time” and the current recording time ([ ] 1 minute, [ ] 4 minutes, [ ] Announce only), and it is displayed on the base.
EXAI378 2/8/2 6:57 PM Page 44 Setting the Message Alert tone Message Alert feature lets you know you have new messages by sounding a short beeping tone. If you set the Message Alert to On and when a new message is received, the alert tone will sound every 15 seconds. status Setting the Message Alert tone to On or Off by using menu key. 1) Press menu five times. You hear the announcement “Message Alert” and the current setting ([ ] Off or [ ] On), and it is displayed on the base.
EXAI378 2/8/2 6:57 PM Page 45 Setting Your Outgoing Message (Greeting) When you receive a call, the answering system automatically plays either a preset message or your own greeting. ▼ Preset message The following message is prerecorded: "Hello, no one is available to take your call. Please leave a message after the tone." See "Selecting the message record time", page 43 how to set the announce only feature. ▼ Recording a personal outgoing message (Greeting) 1) Press and hold greeting.
EXAI378 2/8/2 6:57 PM Page 46 Setting the base ringer volume You have three ringer options. One allows you to turn the ringer off. The other two are volume levels. When you have set the base ringer to off and the handset is on the base, you will still hear the ringer from the handset. status 1) Press set/ringer. You hear the ringer at the current volume level ([ ] High, [ ] Low, [ ] off) (if you set the base ringer volume to off, “off” is announced) and it is displayed on the base.
EXAI378 2/8/2 6:57 PM Page 47 Using Your Answering System The message counter displays the number of messages stored in memory. If the display flashes, then there are new messages are waiting for you. The flashing number represents the number of new messages, not total messages. The EXAI378 series is designed to play your new messages first. After you play all your new messages, you can then play your old messages.
EXAI378 2/8/2 6:57 PM Page 48 Repeating a message 1) Press play/stop to review your messages. The number of stored messages are announced. status 2) After a message has played for a few seconds, press repeat/rew to replay the message. If you have several messages, press repeat/rew repeatedly until you return to the message you want to replay. 3) Press play/stop at any time to stop reviewing messages and return to standby. The message counter shows the number of messages stored in memory.
EXAI378 2/8/2 6:57 PM Page 49 Deleting a message To maintain maximum record time, delete the old messages. 1) Press play/stop to review your messages. status 2) Press delete anytime during the message to delete. 3) You hear a confirmation tone and the message is deleted. You can also delete all the messages. When you press delete, you are permanently deleting the message. Once deleted, the message cannot be replayed. 1) Press delete. You hear a announcement “To delete all messages, press delete again”.
EXAI378 2/8/2 6:57 PM Page 50 Voice memo The voice memo function allows the user to record messages (up to 10 minutes). status • The voice memo function is completely independent of the greeting message. 1) Press and hold memo. You hear an announcement “Record memo message” and a confirmation tone. [ ] flashes on the message counter. 2) Start your recording. 3) When you have finished, press play/stop or memo to stop recording. You hear a confirmation tone and the system returns to standby.
EXAI378 2/8/2 6:57 PM Page 51 Remote access away from home You can operate your answering system from a remote location using any touchtone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new greeting message. 1) Call your telephone number. 2) During the greeting message, press # and enter your PIN code. (See "Setting a Personal Security Code", page 41). 3) The answering system announces the current time and the number of messages stored in memory.
EXAI378 2/8/2 6:57 PM Page 52 * For Memo Record and Greeting Message Record function, the first time you enter the corresponding command, it starts the Recording function. If you want to stop the recording, enter the command again. 5) After all of the Help Guidance prompts have played, you hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart. 6) When you are finished, hang up to exit the system.
EXAI378 2/8/2 6:57 PM Page 53 The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. The first time you charge your handset, the security code is automatically set. (See "About the digital security code", page 7.) In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. 1) Remove the handset from the base unit. Press and hold find hs on the base.
EXAI378 2/8/2 6:57 PM Page 54 Note on Power Sources Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden Parts Department for a replacement battery.
EXAI378 2/8/2 6:57 PM Page 55 If your phone is not performing to your expectations, please try these simple steps first. Symptom Suggestion The status LED won't illuminate when the handset is placed in the base. • Make sure the AC adapter is plugged into the base and wall outlet. • Make sure the handset is properly seated in the base. • Make sure the charging contacts on the handset and base are clean. The audio sounds weak and/or scratchy. • Make sure that the base antenna is in a vertical position.
EXAI378 2/8/2 6:57 PM Page 56 Symptom Suggestion The handset doesn't ring or receive a page. • • • • Severe noise interference. • Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. • Move to another location or turn off the source of interference. The answering system does not work. • Make sure the base unit is plugged in.
EXAI378 2/8/2 6:57 PM Page 57 Suggestion No sound on the base unit speaker during call monitoring or message playback. • Adjust the speaker volume on the base unit. Cannot access remote call-in features from another touch-tone phone. • Make sure you're using the correct PIN code. • Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds. If it cannot, you may have to use another phone to access your messages. If you still have a problem.
EXAI378 2/8/2 6:57 PM Page 58 General Information The phone complies with FCC Parts 15 and 68. Operating temperature: 0° to 50°C (+32°F to +122°F) AC Adapter Information AC Adapter part number: Input Voltage: Output Voltage: AD-420 120V AC 60Hz 9V AC 350 mA Battery Information Battery part number: BT-905 Capacity: 600 mAH, 3.
EXAI378 2/8/2 6:57 PM Page 59 Important Safety Instructions Before you read anything else, please observe the following: When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning.
EXAI378 2/8/2 6:57 PM Page 60 Radio Interference Telephone Line Outlets Radio interference may occasionally cause buzzing and humming in your cordless handset, or clicking noises in the base. This interference is caused by external sources such as TV, refrigerator, vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your home to see what appliances may be causing the problem.
EXAI378 2/8/2 6:57 PM Page 61 TERMINAL EQUIPMENT NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.
EXAI378 2/8/2 6:57 PM Page 62 Index A AC adapter information ..................58 Announce only feature ....................43 Answering system Deleting a message ....................49 Playing a message ......................47 Recording a conversation ............50 Remote access ..........................51 Repeating a message ..................48 Skipping a message ....................48 Turning on/off ..........................39 B Base location ................................
EXAI378 2/8/2 6:57 PM Page 63 Remote Operation Card C U T C U T REMOTE OPERATION CARD REMOTE OPERATION CARD EXAI378 series E X A I3 78 s eri es Remote access away from home Turn on the answering system remotely Remote access away from home Turn on the answering system remotely 1. Call your phone number from a touch-tone phone. 2. During the outgoing message, press # and enter your PIN code. The answering system announces the number of messages stored in memory and the help guidance.
EXAI378 2/8/2 6:57 PM Page 64 Remote Operation Card C U T Task C U T Key Repeat a Message Playing Incoming Messages Skipping a Message Deleting a Message Stop Operation Answering System On Memo Record/Stop Greeting Message Record/Stop Answer System Off Help Guidance # # # # # # # # # # 1 2 3 4 5 6 7 8 9 0 Task C U T Task Repeat a Message Playing Incoming Messages Skipping a Message Deleting a Message Stop Operation Answering System On Memo Record/Stop Greeting Message Record/Stop Answer System Off
EXAI378 2/8/2 6:57 PM Page 65 At Uniden, we’ll take care of you! If you need any assistance with this product, please call our Customer Hotline at 1-800-297-1023 PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE. Our Uniden representatives will be happy to help you with any matters regarding the operation of this unit, available accessories, or any other related matters. Thank you for purchasing a Uniden product. Hours: M-F 8:00 AM to 5:00 PM CST.
EXAI378 2/12/2 10:54 AM Page 66 B B B
