Owner's Manual

Selecting the message record time

You can set your answering system to record messages up to one

or four minutes long.

One minute option:

move the

REC TIME

switch to 1.

Four minute option:

move the

REC TIME

switch to 4.

Announce only feature:

The announce only feature plays an outgoing message, but it will

not allow the caller to leave a message. Move the

REC TIME

switch to the ANN position.

The message counter LED displays “ ” when system is on

standby.

Prerecorded outgoing message for Announce only feature is:

"Hello, no one is available to take your call."

Selecting a PIN code

To play your messages from a remote location, you will need to

enter a two-digit Personal Identification Number (PIN) code

(00-99). To select a PIN, perform the following steps.

1 On the base, press and hold

button until a tone sounds, and the

LED displays

00.

2 To set the first number, press

or to scroll from

0 to 9.

When the desired number appears in

the display, press . This selects

the first number.

3 To set the second number, press

or to scroll from

0 to

9. When the desired number

appears in the display, press .

This selects the second number and

then the entered number is

announced.

Press and hold or

multiple times to

scroll through numbers

on the display.

EXAI8985 7/25/00 17:26 Page 45