Owner's Manual

52
You cannot use
# and
while the new messages
are playing. Press # then
5 to stop message
playback first and go to
step 5.
Remote room monitor
You can call your answering system from any touch-tone phone and
monitor sounds in the room where your base is installed.
1 Call your telephone number.
2 While the answering machine is activated, press # and your PIN
code.
3 The answering system begins announcing the time and day.
4 Press # then 5 to stop the message.
5 Press # then . You hear sounds in the room where your
phone is installed. After 15 seconds, the answering system
returns to the command waiting mode.
6 Press # then to monitor the room for another 15 seconds. Or
select another remote function. Or hang up to exit the system.
The answering system automatically returns to standby.
Turn on the answering machine remotely
If you have forgotten to turn on your answering machine, you can
turn it on remotely from any touch-tone telephone.
1 Call your telephone number.
2 Wait ten rings until the machine answers.
You hear a beep.
3 Enter your PIN code.
The answering system begins to announce the time and day
stamp.
4 Press # then 5 to stop the announcement.
5 Press # then 6 to turn the answering system on.
6 Hang up the phone and subsequent calls will be answered by
the machine.
*
*
*
EXAI8985 7/25/00 17:27 Page 52