Owner`s manual

17
ACCESSING YOUR MESSAGES
Call your telephone number. 1.
Enter your 3-digit security code. You can enter this code any time during the 2.
greeting or after the beep.
The unit waits for a remote command for 20 seconds after the correct 3.
security code has been entered. Menu selections can be made while the
menu is playing.
NOTE 1: The unit answers on the 10th ring when it is turned o or the
memory is full. If memory is full, play messages and erase some of
them to restore memory.
NOTE 2: After the unit plays the remote menu, it waits 20 seconds for
a command and then disconnects.
MESSAGE INDICATORS
The following display messages indicate message or unit status:
00 caLLs Call record log count.
UnKnown
nUMBeR
The incoming call does not have Caller ID service or
their service area is not linked to yours. If UnKnown
naMe appears along with a calling number, the name
information for that number was not available.
UnKnown
naMe
The name information for that number was not available.
BLocKeD
nUMBeR
The caller is registered as “Private Number” and the Caller
ID information is withheld.
incoMPLete
Data
Caller information has been interrupted during
transmission.
staRt/enD
Indicates you are at the beginning or the end of the call
record log.
Message A message has been recorded as a memo.
FP1355 OM.indd 17 22/9/11 9:23:49 AM