Owner`s manual

23
DIALING BACK
When reviewing Caller ID records, you can dial back a displayed number.
NOTE: If PicKUP Phone shows in the display, no other changes to
the number can be made (such as adjusting the area code). The
information sent from the telephone company is known to be a valid
number for dialing back (used only in very limited areas). Once you
pick up the phone, the number is automatically dialed.
Press either 1. SKIP or REPEAT until the number you want to dial displays.
Numbers displaying seven digits (i.e. 555-1234) are within your area code;
however, this does not guarantee the call is a local call. A number with 10
or 11 digits (i.e. 1-555-555-1234) is not a local call.
NOTE: A timer (10 seconds on-hook and 3 seconds o-hook) located
in the upper right side of the display will start, indicating how much
time is left until the unit returns to the Summary Screen.
Press 2. DIAL.
To dial the displayed number while on-hook, pick up the handset or press 3.
SPEAKER before the timer reaches 0. Press DIAL. If the phone is o-hook, wait
until the timer reaches 0. now DiaLing displays and the number is dialed.
DELETING CID RECORDS
To delete the record shown in the display, press 1. Delete once.
To delete all records while reviewing, press and hold 2. Delete for about three
seconds. DeLete aLL? appears in the display.
Press 3. Delete again to complete.
STORING A NAME AND NUMBER IN MEMORY
Press 1. Store. Location? displays.
Press 2. SKIP or REPEAT to scroll through memory locations (0 to 9 or A, B, or C.)
Press 3. STORE again to conrm the memory location.
NOTE: Use Delete to erase existing memories or to correct errors.
Use the number keys to enter the telephone number (up to 32 digits) and 4.
then press STORE to save. (The unit will not dial a phone number in this
mode.) The cursor automatically moves to the text line for name entry.
FP1355 OM.indd 23 22/9/11 9:23:51 AM