Owner`s manual
25
Press a memory location button (3. 0 - 9, A, B, or C). The number ashes if there
is a number already stored in that memory location.
Press 4. Store to enter Edit mode, and then press Store again to edit the name.
NOTE: Select a dierent memory location by using SKIP and REPEAT to
scroll through 0 - 9 or quick call buttons A, B, or C.
Press 5. Store to conrm and save. Wait three seconds to exit.
NOTE: If the name you want to enter is longer than 12 characters,
only the rst 12 characters will be copied into memory.
STORING A REDIAL NUMBER TO MEMORY
Press 1. Store.
Press a memory location button (2. 0 - 9, A, B, or C) for the memory location.
If a number is already stored in the memory location, it will appear on the
display. Use SKIP or REPEAT to select a dierent location.
Press 3. Store again to conrm.
Press 4. Redial/Pause, and then press Store again.
Enter the name, if necessary, and then press 5. Store to conrm.
COPYING A REDIAL NUMBER TO MEMORY
Press 1. Redial/Pause while on-hook. Redial number will display along with
PicKUP Phone.
Press 2. Store.
Press a memory location button (3. 0 - 9, A, B, or C). If there is a number already
stored in the memory location, it will appear on the display. Use the SKIP or
REPEAT buttons to select a dierent location.
Press 4. Store twice.
Enter name, if necessary, and then press 5. Store again to conrm and save.
DIALING NUMBERS STORED IN MEMORY
Whether you are on-hook or o-hook, press 1. Dial. Location? displays.
Press a memory location button (2. 0 - 9, A, B, or C) or use SKIP or REPEAT to scroll
through stored memory locations to nd the desired number.
If you are o-hook, the number is dialed immediately.•
FP1355 OM.indd 25 22/9/11 9:23:51 AM