FP203
CONTENTS Introduction ..............................................................................................1 Features ........................................................................................1 Included in your package .............................................................1 Location and Controls ..............................................................................2 Setup ...................................................................................................
LOCATION OF CONTROLS Hook Switch This unit is not waterproof. Do not expose this product to rain, water, moisture or any other liquid. LCD Display NEW Call and NEW Message Indicator Handset Speaker Coil Cord In Use Indicator SETUP AC Adaptor Optional AA Batteries can be used instead of the AC Adaptor.
Connecting Line Cords and AC Adaptor 1. Plug one end of the supplied telephone cord into the telephone line socket located at the rear of the phone. 2. Plug the other end into the telephone line wall jack. 3. Plug the AC Adaptor lead into the power socket at the rear of the phone. 4. Plug AC Adaptor into a standard wall outlet and switch it on. Setting Time and Date If you subscribe to a Caller ID Service, your time and date will automatically be set for you when you receive your first call to this unit.
Digit Insert 0 Caller ID Telecom New Zealand Customers: this code is already set to "0". Australian Customers: Set to 'Insert 0 Off'. To correctly display and dial Call ID numbers, you may need to insert a digit at the beginning of your telephone number. (eg: in New Zealand, Telecom requires a '0' to be inserted.) New Zealand: If you subscribe to Telecom New Zealand, this code has already been set for you to '0'. If you subscribe to another telephone company, please set the LDS code as blank '_ _'.
TELEPHONE KEY FUNCTIONS Ringer Hi/Low Set the Ringer Switch to the desired level underneath the unit. for HI and for LOW. The Switch is located Regular dialling Lift the handset and listen for dial tone. Then enter the telephone number you wish to call. The dialled number will appear on the display screen whenever you make a call. Redial function To redial the previous number you called. Lift the handset or press and press REDIAL . Last 10 number redial 1.
DISPLAY MESSAGES Message Waiting (New Zealand Only) MSG For LCD messages to operate, you must first subscribe to the caller ID service through your local telephone company. If you have arranged a voice mail service with your telephone company, the LCD screen will display MESSAGE WAITING for a few seconds after a call is received. The screen will then display MSG in the upper left corner until you retrieve the message from the voice mail service. MESSAGE WAITING will be saved as a Caller ID record.
CALLER ID A caller ID record consists of the following information: Time and Date of call Number of new calls or record number Total calls The LCD display will not operate if the AC Adaptor is not connected or if the batteries are flat or not installed. Caller's number Caller's name (if available) CALLER ID OPERATION New Call Indicator The red indicator light of your phone will flash when you have New Calls. It will continue to flash until you have reviewed the calls displayed on the LCD screen.
SPEED DIAL NUMBERS Six speed dial numbers can be programmed into the memory of your telephone ( A Speed Dial label has been provided to record Speed Dial names. You may wish to stick it on the inside of the handset. M1 - M6 ). Each memory location can store a maximum of 16 digits. Storing One-Touch Speed Dial Numbers 1. Press STORE . The LCD shows "-->" 2. Enter phone number using the keypad (up to 16 digits). 3. Press STORE . The LCD shows "-->?". 4.
TROUBLESHOOTING Blank or faint screen Check the line cord, AC Adaptor or replace batteries. Batteries not lasting Review new calls immediately to prevent the new call light flashing for extended periods. Caller ID will not work properly Your phone stores up to 99 Call records. When the list is full a new incoming call will automatically delete the oldest call record. Phone will not ring You may have too many communication devices connected to a single line.
WARRANTY One Year Limited Warranty UNIDEN FP203 CORDED PHONE Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited. ABN 58001 865 498 Uniden New Zealand Warranty only available in original country of purchase.
FOR PURCHASING A UNIDEN PHONE THANK YOU © 2007 Uniden Australia Pty Limited Uniden New Zealand Limited
