Full Product Manual

3
Monitor with VGA Port
1. Connect DVR and monitor
using VGA Cable (not
included).
VGA cable to DVR
VGA cable to
Monitor (example)
2. Connect monitor to surge protector plugged into 120V indoor power.
3. TheDVRbeepsasitpowersup.AertheUNIDENwelcomescreendisplays,
the Wizard screen displays.
4. Select Exit for now; we will return to the Wizard later in the setup process.
TV with BNC Port (VIDEO IN)
1. Connect DVR and TV using
BNC-RCACable(notincluded).
BNC-RCAcabletoDVR
BNC-RCAcableto
Monitor (example)
2. Connect TV to surge protector plugged into 120V indoor power.
3. TheDVRbeepsasitpowersup.AertheUNIDENwelcomescreendisplays,
the Wizard screen displays.
4. Select Exit for now; we will return to the Wizard later in the setup process.
CONNECT ETHERNET CABLE
Connect one end of the Ethernet cable to the RJ45 jack on the DVR and the other to
yourethernetconnecondevice(router,cablebox,etc).
CONNECT CAMERAS TO DVR AND POWER
Eachcameraconnectstooneendofthe60footextenoncable.Theotherendof
thecableconnectstothereceiverandtopower.Theendsoftheextenoncable
are marked for Camera or DVR side
1. Connect camera cable's blue end
(male)tothebluecamera-sideBNCend
(female) of the extension cable.
Male Female
Female Male
2. Connect the camera cable’s RED power
connector (female) to the DVR extension
cable’s RED power connector (male).