Marine Radio - Handheld Marine Radio User Manual

Seaphone OPERATION

VESSEL TO SHORE OPERATION AUTOMATIC

DIALLING PROCEDURE

.Select a free Seaphone channel appropriate to your

location (referto coverage map or Seaphone Directory

from Telstraif necessary),listen to the channel and

ensurethere are no calls in progress.

.Dial the required telephone number on the keypad

Including the relevant STD/IDDarea codes (which

must precede even local phone calls) as appropriate.

.Press the ASTERISK [*] button. Your Seaphone ID and

telephone number will automatically be transmitted.

. A voice announcement (VA) will follow saying "Your

Seaphone call is being connected" together with your

SeaphonelD.

.Ring (or Busy) will be heard, followed by the called party

answering.

Charging commences at this time.

Should the Shore subscriber's telephone number be

BUSY, terminate the call using the HASH [I] Key, allow

a few minutesto pass then press [LN] and ASTERISK

[*] key to redialthe last telephone numberyou have"

entered.

.Operate the Press-To-Talk (PTT) switch and conduct

your telephone call in the normal manner.

.To terminate your call, simply press the HASH [I] button

and listen for a final voice annoucement (VA) from

Seaphone. Repeat [#] if no VA is heard.

Note: If you made an error in entering the telephone

number, simply press [CL] key and re-enter the

correct telephone number.

VESSEL TO SHORE MANUAL CAll PROCEDURE

There is no change to existing manual call procedures.

.Select a free Seaphone channel and call "Sydney

Radio, Sydney Radio this is (VESSELNAME)etc..."

for at least 4 seconds.

.An automatic VA will respond followed by the operator

who will help you with the service you require.

Page 15

HH979XL

"'-,

, ,-- -"..,- ..

---

, "

-T-

t--